Raw Speakers

[ahoustondj]

I am looking for a good source where I can purchase the following.
1. !2' Midrange Raw Speakers or A speaker cabinet with only 2 12" midrange speakers or ones that can be used for midrange.
2. Pro Sound Midrange Drivers and Horns.

 

[Travis B]

are you building your own cabinet or what? Spill the beans my Houstonian!

BTW when are you going to come down to Beaumont! Lunch on me when you do.

 

[ahoustondj]

are you building your own cabinet or what? Spill the beans my Houstonian!

BTW when are you going to come down to Beaumont! Lunch on me when you do.

I can build my own cabinets but if I get two already loaded with 2 12" Midranges I will be happy!
I don't know when i will be down Beaumont way! I have friends who live in Hampshire

 

[Travis B]

Get out! All that is in Hampshire-Fannett is Rice farms. Small community, I bet somebody I know knows your peoples.

 

[jkcomputers]

Um... I use either Elemental Design, or we use Parts Express... Although, Are you using this for pro audio... I really dont recommend it... Unless you are one of those crazy speaker box designers by day... Also, You have to know your electronics for the cross over...

 

[ahoustondj]

Um... I use either Elemental Design, or we use Parts Express... Although, Are you using this for pro audio... I really dont recommend it... Unless you are one of those crazy speaker box designers by day... Also, You have to know your electronics for the cross over...

I do not need a passive crossover because I am using an electronic crossover. Again What I am using is the threeway crossover to three separate amps one for tweeters (In their own boxes), midrange (In their own boxes), Woofers (In their own boxes).
I do not have pics of the system but within a week I'll post some. here is my bass section.
2 JBL Bass Bins each loaded with 16ohms 15" woofer and connected in parallel via a jumper cable to equal 8ohms per side. In other words 4 bass bins altogether.

 

[Travis B]

so you are basically going to create a tri-amped system?

 

[ahoustondj]

so you are basically going to create a tri-amped system?

I already have one but I am refurbishing and upgrading it. Here is an old pic taken about 8 years ago. I had it stored in a warehouse. The picture is a bit grainy, taken with an older digital camera.
JBL loaded Bass on the bottom, EV midrange horn in the middle, EV tweeters and piezos on top.
I am going to eliminate the top tweeters and use the Midrange driver as tweeter section. I am now looking to add two 12" paper cone speakers as midrange section.