So, anyway to fix my Acrobat?

To many ads? Support ODJT and see no ads!

Papa Deuce

Mac Daddy DJ
Aug 8, 2006
19,843
594
64
Valley Forge Area
I finally took it out of storage to check it out. It fires up fine, but the mirrior doesn't keep spinning... If I tap the side of the instrument the mirror will start moving again, but only for 2 - 3 seconds.... tap it again, and it moves.....

I've never actually used this light, but when the mirror is working it looks like one helluva light!
 
how loud was the stereo they seem to work best with the MC-1 hook it up and hit one of the cycles. Or better yet sell it to me for 150 no questions.
 
how loud was the stereo they seem to work best with the MC-1 hook it up and hit one of the cycles. Or better yet sell it to me for 150 no questions.

Hell, if it costs $63.75 to send BBQ to Canada,vis FedEx, imagine the shipping for a 20 pound fixture! :sqerr:
 
I can pick it up in Blaine Washington and it will only be a typical shipping fee or you can bring it carry on to Vegas!!
 
correct John the 1. Let me find my book to give you the codes or go do a google search for the manual info.
 
Papa. You have to check the toggle or dip switches on the bottom of the light. Make sure its set in sound active mode.

I have no idea.... 6,7, 8, and 9 are down....I don't have any manual....


Thanks though... maybe I can research.
 
Chuck - with almost any Martin fixture, full sound active is switch #1 ON - #2 thru #12 OFF. In most cases with lights as old as the Acrobat, the sensitivity of the internal mic can come into play. It's entirely possible that there's some sort of schmutz gumming up the mic windscreen (if there is such a thing on the casing of the unit). How long has the unit been in storage? How did you have it stored? Was it completely an air-tight seal in whatever you had it stored in?

Just some food for thought......
 
Chuck - with almost any Martin fixture, full sound active is switch #1 ON - #2 thru #12 OFF.


Thank you Sir! I will check it when I get home, or tomorrow morning.
 
Allow me to provide this as well:

http://dj-club.martin.com/service/downloadfile.asp?name=UM_Acrobat_EN_H.pdf&cat=65

/\/\ This is the link for the PDF file of the Acrobat's User Manual.

=======================================
Here is the link for Martin Professional customer support:

http://dj-club.martin.com/service/s...NONE&accessories=NONE&dates=LATEST&dofind=yes

SINGLE UNIT OPERATION:

The fixture defaults to stand-alone mode with music trigger whenever power is
applied and there is no control signal. Options for trigger type, mirror speed and
movement range, and lamp intensity may be selected as described under “Standalone
settings”.

STAND-ALONE SETTINGS:

DIP-switch pins 1-9 enable stand-alone options only when pin 10 is ON. When
pin 10 is off, the DIP-switch selects a DMX address. Pin 11 must be OFF for
stand-alone operation.
Pin 12 selects lamp power and works in all modes. Set it to ON for reduced lamp
voltage and longer lamp life; set it to OFF for full intensity.
The DIP-switch 10 setting takes effect only after the fixture has been turned off
and on.

Hopefully the attached picture will help.
 

Attachments

  • Martin Acrobat dip switch settings.jpg
    Martin Acrobat dip switch settings.jpg
    45.2 KB · Views: 7
Allow me to provide this as well:

http://dj-club.martin.com/service/downloadfile.asp?name=UM_Acrobat_EN_H.pdf&cat=65

// This is the link for the PDF file of the Acrobat's User Manual.

=======================================
Here is the link for Martin Professional customer support:

http://dj-club.martin.com/service/s...NONE&accessories=NONE&dates=LATEST&dofind=yes

SINGLE UNIT OPERATION:

The fixture defaults to stand-alone mode with music trigger whenever power is
applied and there is no control signal. Options for trigger type, mirror speed and
movement range, and lamp intensity may be selected as described under “Standalone
settings”.

STAND-ALONE SETTINGS:

DIP-switch pins 1-9 enable stand-alone options only when pin 10 is ON. When
pin 10 is off, the DIP-switch selects a DMX address. Pin 11 must be OFF for
stand-alone operation.
Pin 12 selects lamp power and works in all modes. Set it to ON for reduced lamp
voltage and longer lamp life; set it to OFF for full intensity.
The DIP-switch 10 setting takes effect only after the fixture has been turned off
and on.

Hopefully the attached picture will help.

So pins 1 and 10 need to be on to be sound active is what I am understanding.
 
I just read the manual. It looks like you need switches 1,2 & 10 in the ON position for sound active mode.

If you want a slower effect, 2,4 & 10 must be in the ON postion.
 
Chuck - let's back up a bit first and explain to our brethtren here what your plans are for the Acrobat. Are you using just the one fixture in just stand alone mode? If so, then in order for the unit to be sound active, yes, dip switches #1,2 & 10 need to be ON.

If however, you are linking a Master/Slave configuration, AND you want the units to sync up, AND in time with the music, AND without a controller, then the settings need to be as follows:

MASTER / SLAVE OPERATION

To set the master

Important!
Set only 1 fixture as master (DIP-switch pin 2 and 10 ON).
1 Set DIP-switch pins 2 and 10 to ON.
2 Set DIP-switch pins 3, 5, 6, 7, 8, 9, and 11 to OFF.
3 Select options with DIP-switch pins 1, 4, and 12.

To set the Slave:

Switches #2 and #10 should be set to ON, all others off.

Remember to insert the male terminator plug into the OUTPUT of the Slave in order for it to follow and mimic what the Master is doing.

I'm going to ask our own lighting guru Tyrone to step in on this since he's the resident KING of DMX fixures.
 
LOL, I just want to hook it to my MC1 controller and use it, or just leave it sound active on it's own.

No DMX, at least until I meet Tyrone in Vegas. Lighting is not something I understand at all. All of my lights run in sound active mode.
 
LOL, I just want to hook it to my MC1 controller and use it, or just leave it sound active on it's own.

No DMX, at least until I meet Tyrone in Vegas. Lighting is not something I understand at all. All of my lights run in sound active mode.

Chuck,

You can control the Acrobat with the MC1 controller by running an XLR cable to it, as you are already aware. If you want more control than just sound active mode, set dip switches #1, 2 and 10 to the ON position and leave all the others off.

STAND-ALONE SETTINGS:

DIP-switch pins 1-9 enable stand-alone options only when pin 10 is ON. Pin 11 must be OFF for stand-alone operation.


I hope this clears up any confusion.