Sub wiring question

To many ads? Support ODJT and see no ads!

MADNESS

Well-Known DJ
Dec 20, 2006
2,293
49
65
Florence, AZ
www.primetimedj.net
OK my act 18x is fixed, pick iy up MOnday. Now got a question.
I run both sides (L and R) into the sub,
then 1 side into my mackie 450 and daisie chain into the second mackie.
on the other line out from the sub run into my crown audio amp and into yamaha speakers?

Just a thought. Does this make sense?
 
It would work, but I think that because you are using 2 different pairs of tops, an investment in a crossover or digital proccessing unit might be useful to you.

However, if you want to run stereo, you might want to either use an XLR splitter and split each output from the sub, running one cable to the 450 and the other to your amp, and repeating the same for the other side, or running the outputs from each side of the sub directly into your 450's, and then using the outs on the 450's to run back to the amp.

The biggest problem with running them the way you mentioned would be the fact that you are running it in stereo, but you have 1 left and 1 right per side. You could always run it in mono, if you're into that sort of thing.
 
Or...

Run full range out from sub - both L&R to the Amp
And High pass to the Mackies (Both L&R (If you have that option))


but your setup is fine
 
If it were me, I'd do what Madness just described, assuming the Yammies were 15" speakers.

(run the High Pass L + R to the 12" powered Mackies, run the Full Range L + R to the Crown Amp into the Yammies)