Numark CM200USB problem, HELP!

To many ads? Support ODJT and see no ads!

marlfox213

New DJ
Oct 26, 2006
76
0
38
Raleigh, NC
www.performancedj.com
Just got my new Numark CM200USB in yesterday and had a chance to hook it up today. I only have one problem, when there is no music going through there is SOOO much white noise, this was never a problem with the old mixer I was using. Do you guys have this problem? I heard it was a very good mixer. What should I do? Thanks in advance!

Not that it matters because the system was fine before the mixer but its going into a QSC PLX 1804 and then into two JBL JRX125s.
 
Greets, Brian.

I'm not gonna yell... just offer a suggestion: do you get the hiss through headphones? If the headphone sound is good you may have a patching issue.
 
Only get noise through the headphones when they are turned up all of the way so its not the same as whats coming through the speakers. Do you mean cables when you say patch? Because I'm using the exact same cables and everything as i used with the old mixer. Thanks for your help Fred!
 
Brian
a friend here in BC got a 200USB and has suddenly lost the connect through the USB port so he had to go through his headphone out into a 30 dollar cheapo external SC. He actually sent it off for repair they sent it back saying it works fine...NOT! It has issues asides your complaint you might take it in for return and get another one cause they might send it back from repair claiming its fine. This is the third time I have heard of thisunit with issues and Numark repair not satisfying.
 
Hmmm...

Yup, patch cables. A balanced out should go to a balanced in whenever possible. For what it's worth, my experience with balanced to unbalanced patching resulted in hum rather than hiss. But every situation is different.

Since this is a new unit you may wish to give Numark customer service a ring on Monday and ask for suggestions. That would be my recommendation anyhow.

We'll get it sorted, one way or the other. :)
 
THIS IS A GENERALIZED BITCH

Please don’t think this is aimed at you marlfox. Nearly all of us do this when we’re looking for help. We really don’t provide nearly enough information or format it in the most effective way. Fact of the matter is that if we all knew what questions to ask we’d probably have our own answers so we wouldn’t need to post for help in the first place.

For example “only when no music is going through”, through what? Through an unbalanced input? Through a USB input? Are you using the internal USB sound cards when you have the problem? Where are the mixer control settings? Can you localize the noise to one input? Have you tried bringing all the inputs down to zero (minimum gain)? What was the result? Bring up one gain control at a time? Have you tried unplugging all the input sources, CD, USB, etc.? Result? Are the controls wide open when the noise is objectionable? Where are the sensitivity (input level) controls of your power amp set? Yeah some of these are real rookie questions. Then again almost everyone has made real rookie goofs at one time or another.

A three to two pin plug - it was mentioned in the context of the HUM-X device and I think marlfox said he tried a three to two pin plug AND ran the laptop off the battery. So marlfox was talking power here. Fred was talking interconnects (so often the problem) and took the three to two pin to mean balanced to unbalanced. Is that a correct assumption Fred? We’re all a bunch of blind men (me included) and we’re holding on to different parts of the elephant. We ought to be able to come up with a better format to assist people than just a free format. Anybody think that might be a good goal? Might that be something this board could hang its hat on?

The basic idea in troubleshooting is to divide and conquer That is a secret that I’ve been keeping from the rest of you guys! Eliminate possibilities the best you can by simplifying the setup. Substitute gear where you can. Keep notes. Most times you’ll find the answer on your own. Marlfox I don’t blame you a bit for asking as you did, it might have been something simple or specific to that mixer and someone might have saved you some grief and trouble. Easy scores do sometimes happen. It seems now that you will have to experiment a bit and try to localize your problem. Give us some more specifics if you can.

Oh and Marlfox, welcome aboard!
 
No offense taken Balanced Line, and thank you for the welcome.

I am running sound through the USB sound cards. However, I unplugged all of the input devices and turned all of the gains and sliders down to 0 and the sound didn't change one bit, just as loud (should have said this initially). So basically going with everything turned down and nothing plugged in from the mixer to the amp. The amp is set fully open, but the sound is still there at the 12 o'clock position just a bit quieter.

I am using balanced connections (XLR) to go from the mixer to the amp. The problem has indeed been isolated to the mixer as everything is fine when I hooked up my old board to the system and the sound is gone.

Thanks again for your continued help guys!

EDIT: as an aside: a form to fill out for help that would be posted might be a very helpful tool. Just a fill in the blank on all of the pertinent information.
 
Marlfox, after your well written reply, I feel I owe you some response, said as I simultaneously scratch my ass. To wit: I say, hell, damned if I know [what the problem is]. I searched around and read the manual (only the CM200 is posted). Numark has not posted the CM200USB manual. There is mixed opinion on the base unit as well as the USB model. The people that like it are happy with their purchase. Others however were less than pleased with noise levels, one person specially mentioned noise in the USB model.

Jon, a mod over at DJ Chat wrote an article for DJ Zone about the base CM200 unit:

http://www.djzone.net/pg/reviews/gear/79.shtml

The level of hiss you describe most especially with the gains down, sounds like an abnormal condition. Do they still supply the shorting plugs mentioned by Jon in his article?
 
Nope, no shorting plugs as mentioned in Jon's article, thats odd. I'm more and more wanting to just exchange it because it seems like it's more of a fluke that mine is not quite right. Maybe there are just some bad ones out there and those are the ones that the select group of people (including me) are complaining about. I'd love to get a working one because this mixer is exactly what I need! Thanks for the help Balanced Line!