Need DMX Controller Feedback And Advice.

To many ads? Support ODJT and see no ads!
To answer some of the above questions about the software...

the way it works, is that you add your fixtures, and create fixture groups...

so lets say you have 4 accu scans, 4 martin mac 500, and 10 LED par cans...

you can set the martins to white spots and have them pan across the audience diagonally, set the pars to chase blue and green from the outsides of the stage towards the center, and have rotating red stars on the accu scans... then just create a cue...

when you hit that cue, all of your lights will jump to that saved cue....

now once you have a bunch of cool cues set up, you can put them on random, and they'll cycle through, or you can set them to cycle based on sound control.... now this is cool, because you can set it to change on whatever beat you want... change every 4 beats? 8 beats? whatever you want!

you can also manually manipulate the fixtures on the fly...

and if you're really motivated, you can get an X-keys controller, and set up usb hot buttons.....

and if you're missing the feel of a hardware controller, buy a $99.00 behringer bcf controller to adjust light values with sliders...

if you can make the lights do something cool, you can save it to a button forever.....

with submasters and all that, you can make one hell of a light show!
 
I like the software side of things, but a physical controller is cool for "full on" and "blackout" when you are trying to manually time these features with the music. Something about a physical work surface for these effects seems like it would be quicker than moving a mouse, less lag?

I dunno....

Maybe a combination of both.
 
Steve (thatmusicguy), thanks for asking the good questions. Stuff I would not have thought of asking about.

Steve L. - Thanks for providing the fantastic information and ideas.

Thanks,

Kirby
 
Have you considered Chauvet's "EZ Controller" (CA-8).

If its compatible with the OCEANA......I'm not sure, but the Owner's Manual for the fixture should say if the CA-8 (or its foot pedal version CA-8F) is compatible or not.

Only $29 (plus $7 shipping/handling) at www.effectlighting.com

That is what I decided on, as a "temporary" measure until I learn how to use DMX controller.
 
I found a picture of that NEW controller....

This one has some very cool features. It appears to take a lot of the negative points of other controllers and gotten rid of them.

It has also taken some of the nice features and put them all on one controller. This is the one with TWO "DMX out" sockets. I'd go with this one if I was looking...
 

Attachments

  • DMX ControlCenter_ILS.jpg
    DMX ControlCenter_ILS.jpg
    36 KB · Views: 8
I'm downloading Freestyler now. It now is able to utilize the Magic 3D visualizer, so you can program your shows without plugging in your lights.

Gonna play with it and see if I like it.
 
I'll admit, I was lazy and didn't want to scroll through 3 pages to find this.

Can someone post what USB/DMX controller(s) work with Freestyler?
 
Well, I downloaded Freestyler and the Magic 3D plugin. I gotta say it's pretty frickin' nice. I was able to put my 4 DJ Scan 250s on there, have them make a nice circle (built-in macro) and see it on the visualizer.

So you guys using Freestyler, you're able to use VDJ and Freestyler on one laptop without any problems?
 
I guess I can say this now...

Since NorthernLightFX is a member of the site, that controller I just posted is supplied by Ben up there in Northern MN.

It is currently listed for $199 and is real sweet. I bet he'll have some in Vegas to show us all.
 
the freesytler is in fact very sweet!

as for the usb dongles, they're all pretty much the same... some of the more expensive ones have memory so that they will remember up to 99 light programs, but honestly, just get the cheapest one... they all do the same thing...provide an interface between the computer and lights..

the hardware controllers being shown on here are nice for an entry level item, but this software does 5 times what that controller can do at 1/4 the price...

check out the new dmx412 feature in freestyler for running led par fixtures...

as long as you have a decent computer, you can run this next to VDJ and not even feel it.... it's very low cpu usage....

Awesome!!!!!
 
FYI, the software is what's known as open source.. it's a labor of love project for the programmer.. he's a lighting professional, and very well respected by all of the other lighting guys.... they don't like that his software is free, but they do respect him!

The good thing about this is that there's frequent updates, and they're always listening and adding features that you want or need!


-Steve
 
I've been messing around with Freestyler and can see it's extremely powerful, but I'm still not sure if I like the idea of being tied to a laptop....

I've also been looking at the Wiedamark 24 channel and even the Behringer LC2412, although I'm not sure on that one.

And then there's just the plain old CA-9.

CA-9 would be simple, and Freestyler/USB would be most useful/expandable, and the Hardware board would be most expensive. However, I'm still no closer to an answer.

Someone just tell me what to do!!!!! :) Yes I know how dumb that sounds, but I need to be kicked in some direction here.
 
If you're just wanting to run the Intimidators, i'd pick up the CA 9.....It'll do what you need it to do for 30 bucks....
Next i'd pick up the USB box and Freestyler...start learning DMX as you prepare to add to your dmx arsenal...Alternatively look for a used controller...

My 2 cents
 
That was the issue I was seeing... the CA-9 is only 30-40ish, but the usb dongle is barely more. I suppose I'll just do the CA-9 first though, since at minimum I need blackout and don't want trouble dealing with freestyler until I get more time to mess with it.

Next I would like to get my par's on a couple dimmer packs after I get freestyler (or whatever other software I try) going.

**try to be content.. you dont NEED more stuff***
 
Freestyler Link?

FYI, the software is what's known as open source.. it's a labor of love project for the programmer.. he's a lighting professional, and very well respected by all of the other lighting guys.... they don't like that his software is free, but they do respect him!

The good thing about this is that there's frequent updates, and they're always listening and adding features that you want or need!


-Steve

Hi Steve
Rich Freeze here. Could you please send me a link to the Freestyler site so I can download it? If you don't mind I'll give you a call if I have any other questions.
Thanks Again
Rich Freeze