I use a method i've never seen discussed anywhere using a PC and Parametric EQ's. I've heard that it works for me because my sound card has really accurate A/D converters, but I think it should at least help in any enviroment.
Step 1
Download Spectrumlab here.
Step 2 set your audio recording source.
Step 3 Plug in your mics, put one on a stand and create feedback. Yes you heard me, create feedback. Now look for a solid line to appear in the spectrumlab graph. Place the mouse pointer over it and you'll see numbers appear next to it.
Now here you can see i'm showing feedback at or around 1.340878 kHz. At this point what you need is what's called a Parametric EQ on your mic. We use an EMU1820 sound card at the
7 Bamboo, but this method should work with any Parametric EQ, bandpass filter, etc.
Most filters do not work in the kHz range, most of them work in the Hz range. So you'll have to convert. It's simple, just move the decimal place over 3 digits.
1.340878 kilohertz = 1340.878 hertz
There ya go.. Easy right? Ok now onto setting your Parametric or Bandpass EQ.
Now the example below shows an EQ in
Reaper Basically you just have to put the Hz value in, then adjust the width of the filter. The less width you use the better, you just want to target the offending feedback frequency, not the entire audio range of your system.
And there you have it. My kick butt method for kicking feedback butt.
--toq