EV RE2 Mic having problems?

To many ads? Support ODJT and see no ads!
Anyone using the EV RE2 Mic, I've found in many instances that the gain is really low in it and therefore I have to put the volume of the mixer really high.

I'm not sure if it's a frequency problem, which I always use the Autoscan to find a free frequency.

does anyone use them or had such a problem?
 
Is it a headset, handheld, lav, guitar, etc? Also, have you adjusted the gain internally on the transmitter? Are you using the line or mic level output on the RE2? The line level output is adjustable.

These are a few thoughts that come to mind.

Ben
 
Ben,

Thank you for the reply, I've been using Mic input all the time, so you suggest that on this instances that I switch to Line Level?

Excuse my ignorance, I never actually used the line level on a mic, it was never necessary I guess.

By the way I'm using a Handheld.
 
No, I think the preference would be to stay on "mic", but now I have narrowed it down to two areas of focus. The adjustment inside the handheld transmitter and the mic preamp on your mixer. What mixer are you using? Does it have PFL metering so you can see the input signal level as you trim the gain? Only a few DJ consoles have this, though I consider it an indispensable tool in proper sound mixing.

Ben
 
Ben I hope this is some of the stuff your going to be teaching at Mobile Beat Las Vegas 08 Academy as I didnt GAIN an ounce from what you just said . I havent a clue if my Denon Mixer has that option?
 
It does JT. See the LEDs on the channel strip? Adjust your "gain" knob (top of the channel strip) until you see the LEDs hitting "0", even "+1" is okay as signal is dynamic. You want to trim all your input gains so that assuming you had all channel sliders at an even mix the output would be even as well.

Ben
 
thanks Ben I will check it out tonite as Im doing my fifth consecutive Ukrainian New Yrs party. My longest running event in Canada. This one doesnt even require a retainer and its a given unless they dont have the gig as it is with one of my prefered vendors.
 
Ben,

Thank you for your reply, I use a Denon 400 Mixer, It doesn't have that feature.

The mic I use is a Handheld and it happened again this weekend. Very low volume coming out of it, the gain screw on the transmitter to the max and the volume on the mixer to the max.

I had to pull out a wired mic as my backup for myself, that's how bad it was.

Any input?

Thank You.