Equipment Maintenance

To many ads? Support ODJT and see no ads!
G

Guest

Guest
This is definately not my favorite part of the job. Today as I was pulling apart a couple of my systems getting them ready for the holiday season, I thought about making this a thread.

About once every three months I switch out my cords for new ones and clean my connections.

Once a year I take everything apart and paint my cabinets change the rope lighting around my table, take alcohol and clean my mixer, power amp, and players. I also go through and clean all of my discs.

The systems that play in clubs are the worst thick, nasty, sticky, brown yuck from smoke.

Maintenance is such an important part of keeping your equipment operating efficiently and lengthening it's life span.

How and how often do you maintain your equipment?
 
I do matenance about every gig, on some part of the equipment or another, typically remove the cob webs from the truss, as well as take a black perm. marker to the scratches on the equipment such as speakers, truss, etc. up close it is noticable but from a distance is not.
 
Ahh, the benefits of living in NY. No smoking at any public place. Can't be beat.


Maintenance? Not much. My speakers are in bags while not gigging and still look brand new. I am computer based so discs are not a problem. The rest of my gear is racked and covered while not in use.

I guess I don't really do much maintenance other than a basic cleaning.
 
My last two bar gigs were summer places & being the lead DJ I was charged with breaking down and setting up at the end of the season. I'm a neat freak so I dusted just about nightly but in tear down and the end of season you wouldn't believe the crap I used to pull out of the amps. You'd swear cats and dogs lived there. :eek:
 
Maintain ance

Maintenance of devices without moving parts is greatly over rated. Mixer controls should not need attention (cleaning) more than once or twice in a five year period unless it is in a club and is used daily for several hours. Most manufacturers spec mild detergent like Fantastic or 409 to clean enclosures. Cables should last far longer than 3 months. They should last years unless abused. It should be enough to simply reseat a connector once every six months or so. Disks, as necessary.

Paint is a matter of aesthetics so that would be as you deem necessary. Generally though less is more. Most of this stuff is much better off with a bit on benign neglect. Unneeded attention is an opportunity to screw something up. If it ain't broke don't fix it.
 
I don't know Bob, in the beginning I always waited for something to go before I fixed it not anymore way too many embarrassing moments.

The cords I am speaking of are not speaker cables but 1/4 to 1/4 or rca to 1/4. They are disconnected and reconnected so often that after a while they have shorts in them or have just taken a few to many hits in moving.

After 3-4 months my stuff is dusty, cobwebs and unfortunately we are not as fortunate as Basic as you can smoke in bars and clubs here and they do. Yesterday when I pulled everything apart you wouldn't believe the stuff that was in them.

I look at maintaining my equipment the same as maintaining my car avoiding problems in the future.
 
Well how can I argue with that? Replace as necessary but...

Well Carolyn, you can't use a cord if it has a short or an open can you? If you have found that a 3 month rotation is necessary to avoid problems well that would be the final arbiter. What I'd suggest is that there may be something else going on. Either the cables are routed incorrectly or are of poor manufacture or are treated too roughly. My point being that if one of these is the case, a failure can occur at any time during the life of the cable. It might be almost new and still fail. You already know you are doing the smart thing to get ahead of the problem.

I'd never suggest that you not replace cables that in your experience, are known to have a high likelihood of failure. Certainly you should do what your experience tells you works or is necessary. What I’m saying is that I own cables that are older than some people on these boards and they work fine.

Cables are abused, that is their lot in life. Then again, there are purposeful and accidental incidents. If the cable is chosen, assembled and treated properly they should last, certainly longer than a year. It is possible to have a sacrificial cable that is exposed for some reason to very rough service. Buy accordingly and replace as necessary.

Cable service life extenders:
- Bend cables gently. Twelve times the diameter is safe bend for nearly all cables. Fiber optic cables are the least forgiving, unshielded wire the most. Major cable suppliers specify the radius for each of their cables.
- Insert and remove connecters by grasping the shell not the cable jacket.
- Route cables where they will be protected from abuse
- If cable must cross a high traffic path consider a cable protector like flexiduct
- Coil cords for storage, don’t allow cables to kink.

There was a recent video on cable coiling posted. If I can find the link, I'll post it. There may be more hints but these basics should take you a long way toward extended cable health.

Here's the link: http://www.youtube.com/watch?v=SpMp_3gg-YI
 
Every three months???

Wow! I've had the same speaker cords for my entire career (15 years). I loop them neatly after every gig, and NEVER step on them. And, ALWAYS pull them out by the plug collar. I've always felt that if you take care of your cords, they'll take care of you.

I have a few sets (when my speakers are placed farther away) that I've purchased recently, that I had to re-solder one connection, but that's it.

Side note: I used the cheap red beacons that I bought way back when from Radio Shack, that I've never replaced the bulbs... after using them for all of the 15 years.

Hint: always have a spare, and you'll never need it. It's when you don't have a spare on hand, that something breaks.
 
Maintenance?

What's dat?



The first thing I do when I get a new toy is drop it.

That way the 'newness' and 'perfectness' is over right away.

Then, the next step is to try and remember the last time some particular piece of gear was last dropped...

If it was more than three months ago... I go drop it again, just for good measure.
 
YourBasicDJ said:
Tell that to Balanced Line & Fred.:sqlaugh:
Hey! I resemble that remark. ;)

Seriously, amp cleaning is the bulk of preventive maintenance. Those cooling fans pull dust through the units as well as air. Even a slight buildup of dirt on the fan blade and venturi will reduce airflow by a considerable margin.
 
Seriously, amp cleaning is the bulk of preventive maintenance. Those cooling fans pull dust through the units as well as air. Even a slight buildup of dirt on the fan blade and venturi will reduce airflow by a considerable margin.

Really? Makes sense...I see it on my CPU all the time. So, what should I do...vaccuum my amp?
 
Hey! I resemble that remark. ;)

Seriously, amp cleaning is the bulk of preventive maintenance. Those cooling fans pull dust through the units as well as air. Even a slight buildup of dirt on the fan blade and venturi will reduce airflow by a considerable margin.


I've got a fan in my bathroom. It's not a traditional ceiling fan, it's a bathroom fan to take moisture/odors outside.

A year os so ago we noticed that the fan would take forever to start up and it was making noise. We were about to buy a replacement but before we did we took the cover off the fan.

It turns out there was a large buildup of dust on the blades. We vaccuumed the blades, replaced the cover and the fan worked like new again.
 
The Vinyl Spinner said:
Really? Makes sense...I see it on my CPU all the time. So, what should I do...vaccuum my amp?
Indeed... and the dust buildup you don't see is worse than the buildup you do see. :)

To clean your amp thoroughly, remove it from the rack case, set it on a workbench and remove the top cover.

Vacuum first to remove loose dust. Be careful not to bump nor damage any internal components with the vacuum nozzle. "Canned air" may be used sparingly to remove dust buildup from areas the vacuum nozzle cannot reach.

Once loose dust is removed, you may wish to remove the fan assembly for ease of cleaning. The fan blade and venturi or housing should be cleaned completely. If there's goo buildup on the blade, isopropyl alcohol should remove it. Be sure to avoid liquid spills on the fan motor.

Inspect the heat sinks for goo buildup as well. Cleaning the heat sink fins is accomplished with cotton swabs and isopropyl.

Inspect component connector plugs for cleanliness. If they appear dirty or gooey, remove 'em (one at a time) and clean the plugs and pins with isopropyl.

Reassemble in reverse order. Connect the amp to an input and speakers and test for proper operation.

Hope it helps.
 
I've got a fan in my bathroom. It's not a traditional ceiling fan, it's a bathroom fan to take moisture/odors outside.

A year or so ago we noticed that the fan would take forever to start up and it was making noise. We were about to buy a replacement but before we did we took the cover off the fan.

It turns out there was a large buildup of dust on the blades. We vaccuumed the blades, replaced the cover and the fan worked like new again.
Thank you, my friend. :)

We all tend to clean the things we can see. Dust buildup in an exhaust fan isn't always evident... so we don't think to clean it.
 
To clean your amp thoroughly, ...remove the top cover.

Ya, right! And, after I knock something out of place, rendering my amp inoperable, my warranty will be invalid because I opened the damn thing.

But, thanks. I'll just run my vaccuum accessory along the rear vents.
 
Ken , you are too funny!

Tyrone,
As I said I wasn't talking about speaker cables. I am talking about cords to and from my player, cords for my vocal processor, cordless mic cords, cords from the power amp that kind of thing.

Bob,
I am sure that it is caused from abuse my equipment gets moved all the time and we try not to disconnect the cords.

Actually guys this was a topic at the seminar I just attended. Electrical magnetic current that it takes to operate a vacuum can actually harm your equipment, same with a air can. They recommended dusting it by hand carefully.
 
Electrical magnetic current that it takes to operate a vacuum can actually harm your equipment

Oh, great. I'm just gonna do nothing, then, and hope that something happens on the day, 5 years and 364 days from the date of purchase so that I can get my amplifier fixed for free.

:sad1:
 
Oh, great. I'm just gonna do nothing, then, and hope that something happens on the day, 5 years and 364 days from the date of purchase so that I can get my amplifier fixed for free.

:sad1:

This may sound "stupid" but part of being a DJ includes maintaining your equpiment. You shouldn't be scared of opening up case covers. While it may very well void your warranty you or any other DJ should have enough technical knowledge not to break stuff. ;)

Whenever I buy or setup a computer for someone else the first thing I do is open up the case before even running it for the first time. This is because I often custom order systems for other people. I want to make sure what I ordered hasn't been substituted or "forgotten". It's saved me a lot of aggravation a couple of times; Two custom built systems came with loose connections from the factory. One didn't have the hard drive mounted properly. If I had not taken a look under the hood more than likely it would have caused problems down the road. Sure they would have been covered by warranty but shipping back and fourth is a major PITA plus downtime equals my unhappy customer.

Amps & most DJ equipment is a different breed, I'd venture to say you aren't doing any customizations prior to ordering. You may learn something just by looking under the hood. If you open it up and don't touch anything.. what's the harm?

On another note, does DJ equipment typically have tamper evident seals?