DIY flight cases.

To many ads? Support ODJT and see no ads!
Use lots of foam...

And, at least ½ inch plywood with metal corners and 90 degree edging. Handles are a MUST! When ever possible, put high quality wheels on the bottom.

As a model, look at any Grundorf or Anvil case to see how they do it. You can order the carpet directly from Grundorf to cover the plywood.
 
Fabric Stores and even walmart for the budget route have the same carpet but because its not labeled specialty(flight case material) the price is more reasonable.
 
When working for one of the Multi OPs (Back in the Day) I built a few cases.
One where the Lights were attached to the Lid of the Case. You would also have a Speaker Stand Cap in the Middle. You could just unlatch & put it up on any stand. This was back in the day with only spin & pukes.
 
I have seen a custom built flight case in which a guy personally made, you know with the handles, the strips of aluminum, the black smooth wood paneling, he told my boss that the angle cutting was the hardest part, all 45 degree angles. But it looked nice and served a great purpose for say lighting racks or a huge thing of amps.

I have built several carpeted racks with the necessary hardware as well, those are a little easier to use, and we used normal rack felt for the carpet. As well as some custom built light boxes for our intels to create a nice ergonomical setup.

The light cases each held 4 color changers and 2 pocket scans. They had a recessed male edison socket at the top for power. Additionally we have 4 boxes which have pars in them par-15's ??? Which have a martin 6 channel switcher in them. We also put a edison wall socket on there which also was switched, so we could attach two spin and puke lighting effects to the ultimate stand. i'll see if I can get my boss to get some pictures, as I'm sure he wants to get rid of the lights and boxes, a unique one of a kind idea for the DJ who wants to not have to deal with setting up truss.

Sorry if it sounded like a plug. I get no commission for these sales.
 
I love a good zombie thread.
 
I bought a Foot Locker at a garage sale and that is what I use to store extra Speaker, Microphone and AC cables along with other accessories. I have a smaller hand held briefcase in which I carry hookup cables.
The foot locker stays in the van. I only take in to the venue what I am going to use. Current Speakers are already hooked up in the Racks to their corresponding amps, all i have to do is pull out and connect to the speakers. The over under method of rolling keeps them nice and neat and they take up little space in the rack. In my processing Rack I have a locking drawer in the bottom where I keep things like batteries and a couple of wired microphones.
A Case to hold lights etc is a must as it will protect it from damage. Fortunately I do not do lights so thats the least of my worry.