Crown Amp Users

To many ads? Support ODJT and see no ads!

ahoustondj

Mac Daddy DJ
Aug 13, 2007
20,235
3,465
Texas
For those who use Crown Amps namely these Series CDi, DSi, Macro Tech i Series or XTi ..... do you ever use System Architect Software to configure frequencies etc?​
 
At first glance I am thinking that with System Architect, if one is running a two way (With Two Crown XTi Amps) or three way system (With Three Crown XTi Amps) that an external Crossover may not be necessary. Thoughts?
 
At first glance I am thinking that with System Architect, if one is running a two way (With Two Crown XTi Amps) or three way system (With Three Crown XTi Amps) that an external Crossover may not be necessary. Thoughts?
It appears that is correct .. they have different filter types (BW,LR), delays, parametric filters .. sort of a mini driverack built in.

I still prefer my QSC PLX2s .. they've been bulletproof.
 
At first glance I am thinking that with System Architect, if one is running a two way (With Two Crown XTi Amps) or three way system (With Three Crown XTi Amps) that an external Crossover may not be necessary. Thoughts?

Absolutely! Best thing about being Mobile, is not lugging around a ton of gear. So any chance one could get to reduce, I say go for it. I have 3 Xti's, no external filters. All is done with Harmon's Band Manager. Hpf, Lpf, Parametric EQ, Limiter, Pan, Sum Mono, Stereo, etc.. There is so much one can do with Band Manager and the Crown Amps, I find it would not be benefical to switch amps, or add the extra filter processors, waste of space and time.

Using the Crown Xti's, all that is needed is one input from source, then an output from same amp is sent to the next amp, and so on.

Plus you can save settings to file, and transfer from amp to amp. The Software is free. Also, you can copy and paste each setting from chanel to chanel or amp to amp. Its the future baby!!

LC
 
Wow, all my amps are PB (powerbase) 5 in total, from PB1 to PB3
I thought I got power, did they advance
 
Food for thought - all DSP's (controllers & amps with DSP features) add processing delay which needs to be accounted for. You really shouldn't run a combination of non-DSP & DSP amps unless you have a delay inline with the non-DSP signal chain. You should also read up on DSP amps as some have much more delay than others and you may or may not want to mix & match brands or even model lines.
 
While that is true, it would usually only be an issue if different processing were used for different drivers. For example, if you used a sub with an older non-DSP amp and then used a Crown Xti with built in DSP for the tops, you might need to add a smidgen (technical term) or so to compensate. Assuming similar amps, or a powered sub, I would venture that the delay differences would be negligible. With an over all system DSP (driverack), again, there would be no issue as well.
 
Just alerting people to a potential problem they could face. Biggest issue would be an analog crossover into a DSP amp for a horn loaded sub (adding delay to the side that already has one) and then a non-DSP amp on your mains leaving no way to compensate and having less bass or possibly nulled bass!

Of course there are many variations on how it could help or hurt a setup, but people need to understand this much like gain structure which seems to sadly be very few. :(
 
I looked to see what the possible values for latency is, and no manufacturer that I looked up lists it, so not sure how we would accommodate for it other than by ear and judgement.
 
I looked to see what the possible values for latency is, and no manufacturer that I looked up lists it, so not sure how we would accommodate for it other than by ear and judgement.

I would guess that they don't publish it because it would only confuse the majority of their customers. Kind of like listing real full band before clipping power specs would make them look bad compared to the reset of the marketing geniuses who list limited bandwidth peak power at clipping numbers. The test results I was reading were the ipr3000dsp compared to the non-DSP ipr3000. Very impressive power results, but the inherent delay in the DSP was not negligible. I don't remember the numbers and don't want to guess, but it translated to feet of delay not inches. It was mentioned that the XTi delay was similar.
 
Feet is a big issue then, as it's roughly 1.1ms per foot, so I guess it's something to watch and for the less experienced to ask questions about.
 
Scott, Steve,....oh yeah, you too Houston:triwink: One of my systems runs 1 Crown XLS 802 for tops and 2 Crown XTI 1000s(bridged mono) for each sub. I currently manage the signal with a DBX driverack which I've been thinking of removing because I just don't like it. Do you see any compatibility issues with me using these different model amps if I go back to using a EQ, crossover, ect?
 
Scott, Steve,....oh yeah, you too Houston:triwink: One of my systems runs 1 Crown XLS 802 for tops and 2 Crown XTI 1000s(bridged mono) for each sub. I currently manage the signal with a DBX driverack which I've been thinking of removing because I just don't like it. Do you see any compatibility issues with me using these different model amps if I go back to using a EQ, crossover, ect?
What are the tops and Subs that you use? Short answer will be there should be no compatibility issues as each section will be doing its own thing. Proper phasing is a must though. What Crossover are you thinking of using? Why don't you like the Driverack?
 
What are the tops and Subs that you use? Short answer will be there should be no compatibility issues as each section will be doing its own thing. Proper phasing is a must though. What Crossover are you thinking of using? Why don't you like the Driverack?

2 or 4 JBL MPRO tops(15's, horn) 2 MPRO Subs(2x15) I don't like the driverack because I can't seem to get the sound as good as it was when I used seperate units for processing. It was easier to tweak on the fly. I was using a Rane EQ, Rane crossover, BBE 882i, DBX compressor/limiter.
 
The benefit of the Driverack is that is has a couple of adjustments that you can't get easily with the Rane, primarily PEQ and delay (feedback reduction is another useful tool). I agree they can be a bitch to set up properly, but you shouldn't get worse sound if set up properly. Which DriveRack do you have? You can still use the Rane EQ, the BBE and the comp/limiter if needed. The Driverack really doesn't have those last two features anyway (except maybe limiting).