Mic Feedback

To many ads? Support ODJT and see no ads!

MADNESS

Well-Known DJ
Dec 20, 2006
2,293
49
65
Florence, AZ
www.primetimedj.net
I have always had an issue with this an want to fix it.

When I do events I at times end up with feedback when the mic is used and it is generally when guests are using the mics. I do not know if it is how I set up or what. I see photos of set ups with the speakers right next to the DJ console and I have never been able to get that to work for me.

I generally set up with my console off to the side and the speakers in the center of the dance floor, so I am not creating a loop, but when guests use the mic it crweates feedback, especially if they go on the dance floor. It is at times embaracing.

I use denon mixer, mackies 450's and b52 active 18 sub. My mics are Gemini dual hand helds They work well, but do noit know if they are the issue. I actuallty had the same problem with a shure mic awhile back

What do the Techies here recommend and also do feedback destroyer work well?
 
I use my rig for live sound often, and i have an extra eq in my rack.

I run the mic through a channel of eq, turn up the gain during sound check,
and cut those frequencies that are causing the feedback.

Also, I always tell clients to be mindfull when they take a mic on the floor,
and don't stand directly in front of the speakers with it.
 
I use my rig for live sound often, and i have an extra eq in my rack.

I run the mic through a channel of eq, turn up the gain during sound check,
and cut those frequencies that are causing the feedback.

Also, I always tell clients to be mindfull when they take a mic on the floor,
and don't stand directly in front of the speakers with it.

Exactly what I had to do at my old school. They had a real issue with the on-stage hanging mics picking up feedback. I eventually brought a screwdriver and took the safety cover off the EQ and cut the frequencies feeding back. I was able to turn up the gains to max on the mics without feedback, where as before we could only put them at 1/2 gain without feedback.

I have a Dn-X500 mixer, which only has a 3-band EQ for the mic, you think it would be a wise investment to pickup a rackmount EQ just for the mics?
 
You need to use a microphone with a tighter pattern so that it's MORE directional and less susceptible to feedback. The down side is that you MUST then speak directly into the mike.

The pattern is called a cardioid meaning "heart shaped" then hyper-cardioid which is like if you would stretch the heart out pulling top to bottom, making it long and narrow.

Use the right tool for the right job. For almost all of our work you should never use an omnidirectional microphone(non-directional)
 
Excellent advice from these folks. Thanks. :)

It's important to note that many people don't know how to use a vocal mic correctly. The mic should be held close to the lips, not at chest level. We've had good response by giving a brief tutorial before handing the mic over to speakers.

The only thing techie I could add would be the possibility of a compressor/limiter in the processing chain. Most pro sound rigs run mic channels through C/Ls anyhow. We used to get mic ring too but the C/L put a stop to that. Currently, we can run the big tri-amped house rig and a speaker or vocalist can stand between and in front of the stacks and be heard clearly with no ring whatsoever. I'll give up my C/L when it's pried from my cold, dead fingers, lol. :D

EQing the mic channel separately is important. What this will do is match the mic's output to your sound system. No two sound systems are exactly alike ~ some speaker systems project vocal ranges farther than others. EQing the mic to your system will make a world of difference.

We had to cut the lows gain on the mic inputs back to around 30% attenuation to eliminate the boominess from the subs. If you haven't tried this already, give it a shot and see if it helps.
 
The only thing techie I could add would be the possibility of a compressor/limiter in the processing chain. Most pro sound rigs run mic channels through C/Ls anyhow. We used to get mic ring too but the C/L put a stop to that. Currently, we can run the big tri-amped house rig and a speaker or vocalist can stand between and in front of the stacks and be heard clearly with no ring whatsoever. I'll give up my C/L when it's pried from my cold, dead fingers, lol. :D

EQing the mic channel separately is important. What this will do is match the mic's output to your sound system. No two sound systems are exactly alike ~ some speaker systems project vocal ranges farther than others. EQing the mic to your system will make a world of difference.

Any suggestions on which compressor/limiter you would recommend? I've considered the Driverack PA for a long time, and I believe one is included.

Also, as far as EQing the mic, you mean cutting frequencies that feedback, or is there more to "matching a mic to your system" then just cutting frequencies?
 
Any suggestions on which compressor/limiter you would recommend? I've considered the Driverack PA for a long time, and I believe one is included.
We use a DBX Project 1 model but you are correct. The Driverack is an all-in-one package that will suit your needs well. I have read several positive reviews on the Driverack.

Also, as far as EQing the mic, you mean cutting frequencies that feedback, or is there more to "matching a mic to your system" then just cutting frequencies?
Yes, Sir. Cutting the frequency area that's causing the ring is usually sufficient. Cut just enough to squelch the ring. Some mics are more sensitive to some frequencies than others.
 
There are also combination units that act as a microphone preamp, comp/limiter, de-sser, noise gate, and EQ. The units I have worked with are from Symmetrix and run around $300-500 depending on the model.
 
Another simple old trick for low frequencies is shut your subs off at the amp when the speaker is speaking. It prevents the boominess and helps with people that pop thier Ps
 
Side Note: Did you know the work "Feedback" is the only
word in the English dictionary that contains the first five letters
in the alphabet?
 
I had a hunch man.....Do you have even a meager budget to move over on the scale as far as brands go?
Or at least to get a DBX driverack?
Either will help immensely...

I do not have alot of expendable cash tight now. Medical expenses are killing me. 3 surgeries this year. Nothing life threatening, but still costly.

What would be an upgrade for a reasonable microphone?