Re: Need help with Xover and 2 amps

To many ads? Support ODJT and see no ads!

jackie bone

New DJ
Oct 20, 2007
2
0
54
Hi all, I have 2 crown amps, dbx compressor and a DBX 223 Xl xover. I am using 2 Yamaha 15's and 2 yamaha 18 Subs. I am having trouble with connecting my speakers to the Xover. I ran cables from the mixer to the compressor and then to the Xover. I have connected the subs to ch 2 of the xover and then to the amp that will feed the subs, and channel 1 of the xover to the other amp that will serve the 15 highs. I am worried if that is correct.
Can anyone help with possibly a sketch of the connections or details of it please?
 
I'll try to get a sketch to you after a bit. Basically though, each channel should have both a "hi" and "low" output. So you should be able to have your L/R inputs from your mixer into channels 1&2 on the xover. So let's assume L=1 and R=2. Your outputs to your amps would then be 1 High to High amp Channel 1, and 2 High to High amp channel 2, 1 Low to Low amp channel 1 and 2 Low to Low amp channel 2. Make sense?

Ben
 
Thanks I think I've got it. I'm still lost with the settings on the xver to ensure that the frequency are automatically distributed to the correct destination. thanks