Never Before Seen-behind the scenes of Square One

To many ads? Support ODJT and see no ads!
So I asked the question over at ProDj re: rigging.....here's the Q & A.....

Posted: Tue Oct 16, 2007 6:00 pm Post subject:

--------------------------------------------------------------------------------

Q - Brian - any issues in hanging the gear from the gym ceiling. I would assume that there would need to be rigging points factored when the building was constructed.

It looks like a lot of weight on the ceiling beams....Any special requirements before flying the gear?
_________________

A- Nah... that whole rig weighs less than 4000lbs.

Those ceilings are rated at 60+ tons

remember, even at 4000 lbs... it's no different than 20 - 200 lb. men walking on the roof. I'm sure there were more than that when the building was under construction at the time it was built.

I have had people call in structural engineers to survey my rigs and I get the same laugh from the guy evey time. I might be more concerned if the roof had 5 feet of wet snow on it. but, otherwise, no... it's not a problem.
 
That's a pretty lame argument. I've never seen 20 people working on a roof and all standing on the same roof truss. A stereo is a live load--it may weigh 4000 lbs but it's load is higher. Legally, you can only rig from certified points. Yes, it is *probably* safe. I ain't doin it. I would bet my right arm that if a failure occured, the insurance companies of the school, the dj and the production company would laugh. That would not be covered. You need to have an engineer a load rating at particular points (generally the support junctions on the red iron). In addition, you should have a record of the load you are putting up there, and how it is done. In litigation, a defense had better include a certified rigger at the healm as well. It's a pretty special situation to hang things above peoples heads safely and have your a$$ covered doing it. I will not walk that line. But that's just me. I'm still glad to see people doing bigger productions; it makes people consider it and think of it. That is good for me too. I hope nothing happens to make them (the schools or the production co.) regret it.
 
Val - I'm an insurance adjuster by day.....I wouldn't be real comfortable with this response....I just posted it as a matter of interest....2 ton above 3000 student.....What sort of chain/pulleys/fasteners are being used now. I woinder if their liability insurer is aware.....

Makes you think....
 
All I can say is...WOW!!!
 
Steve
What is your insight from the insurance business? I could be a little overly conservative and out of line....I just prefer to hold my assets tighter to me!! lol I know it can be done. I know these guys have good gear for the job. I don't know their training/formalities or insurance.
 
Steve
What is your insight from the insurance business? I could be a little overly conservative and out of line....I just prefer to hold my assets tighter to me!! lol I know it can be done. I know these guys have good gear for the job. I don't know their training/formalities or insurance.

Valerie if a loss were to occur (say the boxes fell and injured/killed someone). there are going to be a number of issues and with that the potential that the Insured could refuse to provide coverage for the loss.

When you bought insurance you likely would have been asked the nature of what your business entailed. You might have said: disc jockey service. To an insurer that means something specific; playing entertainment for customers....The Insurer decodes if they are prepared to accept that type of risk and charges you a premium for that.

where the issue could arise is if you go beyond what you have declared that you do. Does the description of "disc jockey service" include jacking into the building's electrical systems, hanging 2 ton of speaker from the roof...etc.

That insurer may specifically as a matter of business practice, not want to insure services that fly boxes or jack into electrical systems; the risk is outside what they are prepared to accept.

For those that do bubble parties, does your liability insurer know? That is likely outside of what the consider to be "a disc jockey service". There are different risks associated with different activities.

Secondly if a loss occurs, you look at negligence..based on the response above, there's no hope in hades of defending any claim.

At least if you brought in outside riggers, the school provided rigging plans, stamped by an engineer....you've got the potential to bring other parties into the action....

With all due respect to the other guys, if a accident occurs, they are dead in the water......as I see it.

lastly....looking at that scenario and yours...I hope you've got more than a million dollars liability insurance.....you should have at least 5 million. Look carefully at your exclusions. Ensure that people doing specialized duties are certified, if the can be. Document everything....People that come in to help you; ensure they fall under your policy...

Do you have a sexual abuse molestation exclusion? Sounds silly...but working in a high school environment; how easy would it be for someone to say one of your crew assaulted them.......I've seen crazy things in my 25 years at this job......


Many will say and have said: "He over reacting.....will never happen....Problem is...in my line of work, after an incident, they say: I thought it would never happen......

This is just my point of view. I'm not knocking the other guys, just basing observations on what has been presented publicly.
 
I'd get some Super Genies if i needed to fly some speakers at a school.

I believe they'll go 25 feet up, and you wouldn't be taking chances on rigging on a roof that may, or may not take the weight
 
I second the Genies for undetermined locations such as this. There are certain conditions where these lifts should NEVER be used. There are some good rigging books available on amazon for those interested in this type of stuff. If you have NEVER worked with industrial lighting and sound rigging as explained or shown above, DO NOT ATTEMPT IT!

As Val may know, there are many things that are done to keep individuals safe when a rig is "flown". Anytime truss is moving towards the ground the "motor" (Electric Chain Hoist) operator will yell "All Truss Coming in" or if just a portion is being leveled such as downstage "Downstage-Bump". When you hear these words being yelled out, it is advised that individuals stay clear of the moving truss.

All parts should have a safety ratio of 1:4 which means if something weights say 25 lbs, the component needs to support at least 100 lbs. Some companies will do a 1:5 safety ratio even. Don't forget to include shock loads, such as something being instantly "jolted" that 25 lbs object can instantly increase to 100 lbs by something unexpected, a rocker pulling on your speakers, etc.

----

Another common thing that we do here in our area is the IATSE (International Alliance of Stagehand Employees) do the rigging, they are properly trained to do rigging. Some venues require them to be on site to do the initial rigging, typically three riggers will be in place, two up riggers, who walk on the beams practically protected by a lanyard. A down rigger, ensures your motors and chains are properly being hoisted among other duties. These guy's usually are steel workers, it's amazing to see them work. They actually have a dangerous job, and some super insurance coverage! One event, one worker nearly fell 50 feet in the amphitheater! I think he was saving a rope from falling down and potentially hurting somebody on the ground. You have some crazy steel workers occasionally too, singing Bing Crosby, but that's another story altogether. They aren't scared of 100 foot heights either on a short 1 food side beam! They sometimes walk without a lanyard, which is against OSHA, but its amazing these types of workers have never really had a big accident heard in the news.

if you don't know, ask... Another pro sound and lighting board I frequent constantly shows very unsafe rigging practices, I am in awe of some of the bad rigging practices. Education is key in my books my friends. A few months ago a truss type tent at an entertainment event collapsed, nearly killing a few people, luckily there was no injuries. When your dealing with that kind of equipment that high, there is little room for error.

These idiots who think they know rigging are going to ruin it for us all. More stories like above will likely cause legislation to be passed making our job much harder. Who wants that?

----

Sorry Guy's:
Rigging is a particular passion of mine. I cannot stress safety enough!