looking to get a couple of Intimidator 1.2s, and dmx controller

To many ads? Support ODJT and see no ads!

ou812

DJ
Sep 26, 2006
1,046
6
51
Klamath Falls, Oregon
Hey all,
I am a noob to DMX lighting and would like to get a couple of scanners (Chauvet Intimidator 1.2s) for my light show. There are a ton of dmx hardware controllers on the market, but what would you guys recommend for a beginner? I have read Tyrone's sticky about dmx, as well as the Freestyler software guide that have been posted....but would like to hear some opinions from the pros here!

1. What controller?
2. Software controlled, and if so, what interface?
3. Any other things I should know or be asking?

thanks,
Jeff
 
Jeff PM Northernlight FX on here Ben will set you in the right direction and give you a great deal to get you started.
 
The 1.2's are a great choise...

...but they are no longer manufactured. Get as many as you can afford now before there aren't any left.

I also suggest any 12 fixture controller is acceptable. You can get them from most suppliers for about $100, or used on e-bay around $60.

If you decide to buy a package and still don't understand what you're doing, check out the "book" or call me, and I"ll get you going.
 
I'd save the hassle of software based control for now until you get used to a simple controller like Tyrone suggested.

The biggest reason being the fact your fixtures are 4 channels or so....
Understand the basics hands on, then move to software based stuff when your lighting gets more extensive.

Don't forget you can pilot your old par cans with DMX dimmer packs too....

My favorite board right now is the DMX operator pro which is perfect for doing just that.
 
Thanks for all the input guys....I appreciate it. I will pm Ben to get his opinion on the subject, as I have thought about doing something with some truss stands with the scanners on top of them for a while now. I have seen some setups on this site where the trusses have a colored light shine up through the trussing with a white cover that looks really sharp. I am not sure what lights are used there (a color changer, or led, pinspot?), but I like the idea of being able to change them for mood lighting or to match colors of the wedding....
 
Yep...

Most of us here, call those "truss warmers". You will want a small color changer to face straight up on the inside base of the vertical truss. I'd suggest a Chauvet "Colorsplash Jr", because it's small size. If your truss is really tall, you may want one on top, and one on the bottom.
 
do NOT spend a ton of money on a DMX controller.

at least.... dont go over $100 (unless you can afford a grandMA)

once you get going with DMX, you will want to shoot yourself with scanners/moving heads if you have a fader DMX board. Free software is much more efficient for that ($50 for software's hardware)

However, if you just use pars and the like, you may find it more suiting?

Just do whatever works for you....