Chauvet Customer Service/Warranty Work

To many ads? Support ODJT and see no ads!
I feel I have to post this. I can't argue with anyone's personal experience, nor will I attempt to. But what I will say is that from an ideological standpoint Albert Chauvet is a friend of mine, and a person that I have known both professionally and personally for a great number of years. He is very committed to customer service and enhancing the customer experience. It becoms more challenging to ensure reliability when you offer "affordable" products. It's an unfortunate casualty of the race to zero. I also know, and have known John (head of the tech team at Chauvet) for a great number of years. I've never seen a man with only one hand solder as fast as he can, nor do I know anyone who is better at tech support in this industry. I feel badly for the experiences that you have had, so I encourage you to try to speak directly with John (ext. 22) and tell him I said so. I put MY word on the fact that he will take care of you.

Ben

A little inside information might help things. I will give it a shot. The old saying "Good help is hard to find" holds true. If John is the head of the support/repair team there that is definitely not the individual I was transfered to and/or talked with. Even when I phoned back looking to speak with the head of their support department I was transfered right back to the individual who treated my very poorly not 15 minutes earlier. I did not expect miracles for $120 a light or $185 for a controller. Hell, I was just hoping they would last a few years. I'm a firm believer in "You get what you pay for" so I was not surprised when I started to have issue with these lights. I did however expect the warranty to be handled and honored in a timely and courteous manner if ever need be. The courteous part went right out the window with whomever I spoke with, I never got to the timely part.

I am not a stubborn individual by nature so I will contact the person you speak of and see where that gets me. Thank you for the post and for throwing some inside insight onto things at Chauvet.
 
UPDATE... 20 Minutes later...

Per Ben's advice I stopped typing the previous post and picked up the phone and called Cahuvet and spoke to John as recommended. John was tied up so it took about 10 minutes to get to him (that isn't me bitching BTW) but I finally got him on the phone, explained who I was, who referred me, and told him of my problems. He promptly apologized for my bad experience and looked up my RMA, which was still on file, and told me to send it in and he would escalate my repair compliments of the poor customer service I received earlier. For the rest of you waiting for repair items, I was informed that they are somewhat swamped right now and repairs are taking longer than usual.

I guess this once again proves the theory that "Good help is hard to find, and even harder to hang on to" because people who actually can get things done are in demand. So, with one 20 minute phone call to the right person I am getting my gear fixed which I am taking over to UPS shortly. I am thankful to Ben for his post, and I do not feel quite as much discontent for Chauvet right now as I did in the past few days. For the record John treated me very well and was polite and knowledgeable on what my issues were and spoke fondly of Ben @ NLFX and is looking forward to more cuddle time with him in the near future (just jokin!), he did speak highly of Ben though :rofl:

Let this also serve as a lesson to all of us that buying gear from Guitar Center or from mass on-line distributors just to save a few dollars probably is not a good idea! I have never ordered from NLFX B4 but I will be soon as customer service and people "In-The-Know" are more important to me long term than saving $20 or $30 bucks. Ben clearly knew how to handle this and even though I am not his customer told me how to get it done and who to contact to do so. I doubt very seriously that the kid behind the counter at GC could pass along this type of information ?


Mucho Grassy-Ass!
 
Just want to clarify, that I've never had any problems at all with my Chauvet products in the past and will gladly buy from their product line again, as they took care of me.

It was just really strange that I had 2 different lights go on the fritz about the same time. :sqconfused:

Stuff happens.
 
Once again, my friends. I've seen it many times. :)

I've seen it a lot during my years of working maintenance in industrial manufacturing. I can't drop names that anyone in this biz would know but I've been there on the plant floors since 1983.

When you're directly involved in the manufacturing process you know what goes on. The Chinee stuff is hit and miss. Americans make it to last. We can get the replacement parts you need. The Chinee make it to sell. It's disposable. No replacement parts, no guarantees. Sorry about your luck.

Perhaps they'll get their act together one day. Japan did it. Korea and Hong Kong did it. Germany did it. Once they do, they've priced themselves out of the entry-level markets. ;)
 
I feel Henry Ford Rolling in his Grave Fred. Cars made in America dont last and even cabinets built in the USof A no longer last the life of the house like in the past. Quality has went by the wayside in every level. In my humble opinion most likely German built items (automotive, Industrial machinery etc still have quality you wont find anywhere in the world today) China is of course the lowballers in the world and becoming Rich in the process. The American people and government have sold out and its much the same here in Canada.
 
Finally got around to opening the lights that were repaired under warranty work. Both (Mushroom & Double Derby) work fine, but they forgot to return my power cord for the DDerby! :sqmad:

Here we go again!.......:sqrolleyes::sqeek: