I want a mirror ball!

To many ads? Support ODJT and see no ads!
Ok, you veteran DJs, I want a mirror ball. Can you talk me out of it?

I bought a StarBall II a while back and I don't like it. I wanted it to simulate a mirror ball...something I could play during slow dances. Figured I could just plug it in and go. But it's big, heavy, and I have not found a way to mount it on my light stand. So now I'm thinking about a mirror ball again. Besides the nostalgia, I think it would throw more light than the StarBall, and I could bounce colored light off it too to change things up. I figure they might be difficult to set up so the light hits them right, etc. Any experience out there w/ mirror balls?

Thanks,

Will
 
You can not beat the classic!!! They are cheap and easy to use,,,,, I sometimes put my motor on a circuit so I can have to off for staic beams, or on for the whole spinning feel.... it's got a great look and people love it just when they walk in.

I have mine on my t-bar with 2 pin beams clamped onto the legs to throw the light...

Sometimes I will gel one of them with pink or red, or this time of year I'll use orange....
 

Attachments

  • Me 19.jpg
    Me 19.jpg
    136.3 KB · Views: 5
I love and prefer mirror balls versus the StarBall. I mount them to my 10' truss and shine light on them from the poles.

D'Oh! I went with a Star Ball II as well because I couldn't figure out for the life of me where I'd mount the Pin Spots to be affective.... (turns around to kick self in the a$$)
 
in my light tree that is pictured, the motor is built into the bar... but when I do trussing shows, I made a cheap bracket... I mounted the motor onto a small piece of plywood.

I drilled a hole in the middle and BEFOR I screwed on the motor, I put a bolt thu the plywood so I could attach a clamp/hook...

so here is the motor bracket and that is how it looks
 

Attachments

  • Motor 4.jpg
    Motor 4.jpg
    30.4 KB · Views: 1
  • Motor 6.jpg
    Motor 6.jpg
    39.1 KB · Views: 1
  • 10 28 Gig Chuck w nite lights.jpg
    10 28 Gig Chuck w nite lights.jpg
    126.3 KB · Views: 4
I love using my mirror ball... if Im setting up my entire truss, and lighting, its no problem to add... actialy, Id never want to go without it. If Im not taking my entire lighting, its a lot of work... almost as much as the entire lighting setup. I so not have a proper T bar, or mirror ball stand...

Enjoy:
DSCF1831.jpg DSCF1851.jpg

DSCF1824.jpg DSCF1604.jpg


djscottiebusinesscard2copy.jpg
 
Thanks for the pics, I've always wanted a mirror ball, but its always been moved to the back of the list of stuff to buy. lol
I may just pick up one with 2 pinspots. When I get my scanners I really want to aim 2 scanners at the mirror ball and have them change colors - thats a really cool effect.
 
I would suggest a 12"... 16" is cool, but only if you have a large truss and are able to get some height. 12 is a nice balance for a mobile with an average stand or truss playing in most venues. And they're not very expensive... I think we sell a 12 for around $20 or so. We also offer the motors, pin spots, colored lenses and more. We even have package deals. ;)

Ben
 
Careless indeed... you'd have no way to assure your lasers wouldn't aim at the people!! :sqerr:
 
My old employer used to have a 3' (That's right THREE FOOT) disco ball, You had to hang it with "Aircraft" safety cable, and I never saw the motor for it, but I imagine it was beefy. Thing weighed over 100 lbs. Was hung in a club (now disfunct/closed) and never saw it again. Ironically club got converted into a church (still has liquor license) was strategically bought to prevent any other new night clubs (on the same street) to open.
 
There is no replacement for a good old fashioned mirror ball. Get the slowest motor you can; 1 rpm is about the slowest out there. If you have intels, you can program scanners to hit the ball and even use colors & gobos for different effects.

We have a 20" ball; more than a bit big for most mobile systems. We use 2 Martin 812's and 2 Robocolors (color changers) to light the ball.
 
Back in the day I loaded a 12" mirror ball and pinspot on a tripod stand that I made up myself. 1 RPM motor drive with dimmer for lamp brilliance. Pinspots are inductive loads so don't use an ordinary light dimmer. It won't work. You'll need a triac motor speed controller.

I junked the thing in 2000 because the mirror ball was pretty much shot. It had gotten knocked over a few times during drunken brawls and no one was asking for it anyhow... until an old client from back home asked for the effect for her forthcoming wedding.

To make a short story even longer I obtained an ADJ Sunray. This effect has served us well. I installed a lamp dimmer in it as well. I don't fuss with hanging mirror balls and the hassle of aiming those pinspots at 'em. :)
 
Scottie and Valerie suggest a slower motor...1mph. Are we all in agreement here? BTW, all these pics didn't come thru last night when I was looking at them but for whatever reason, they are coming thru now. They look great! Thanks all for posting them. Looks like only Fred mentioned the difficulty in positioning. No one else has anything to say about that?

--Will