Where do you suggest??

To many ads? Support ODJT and see no ads!

DJDrea

New DJ
Apr 18, 2007
22
0
52
Most of my lights are not DMX contolled. I like it that way, makes it easy :sqcool: I did go out and buy an Chauvet Oceana and didnt realize that if you had it in stand alone mode that it would ONLY work like a demo. Now I know nothing about DMX controls unfortunately, but I did buy Tyrone's Book and I am looking forward to reading it and figuring it all out. So my point... Where do you suggest buying a DMX Controller and what kind of control do you suggest I buy?
 
Most of my lights are not DMX contolled. I like it that way, makes it easy :sqcool: I did go out and buy an Chauvet Oceana and didnt realize that if you had it in stand alone mode that it would ONLY work like a demo. Now I know nothing about DMX controls unfortunately, but I did buy Tyrone's Book and I am looking forward to reading it and figuring it all out. So my point... Where do you suggest buying a DMX Controller and what kind of control do you suggest I buy?


I would call Ben @ NorthernLightsFX, He is one of our sponsors here at ODJT...

I have dealt with him personally, and I plan on doing so in the future. You can't go wrong, DMX is one of his area's of expertise.

He along with our own Tyronne put on a DMX class at Mobilebeat 07 in Vegas this year......great presentation...Give them a call and ask for Ben personally......
 
DJDrea,

I would highly recommend looking into a computer based controller over hardware. Learning curve is a little higher, but the speed of programming your shows and the ease of running then makes the time invested well worth it. I personally use Chauvet ShowXpress and I'm thrilled with it. Good luck!
 
I just got started with DMX, it looks scary the first time you look at the numbers on the manual. I have a DMX-55 controller from Chauvet along with some scanners, color changers and Colorsplash Jrs. My controller came preprogrammed and I had everything running without a problem.

The second day I started playing with new scenes and chases and it's not that hard. Once you sort what each fader does with the channels on the lights and it's a breeze ;).
 
I have the DMX-7 by Chauvet. It is very basic, and now that I'm getting more scanners, I'm contemplating a move to computer-based control. However, it is a full-feature and easy to use controller.

You can see the pic of it here.

It is very small and fits very nicely in my rack.
 
Check Ebay. A lot of people will buy a DMX controller, but can't figure it out, so they sell them cheap. That's how I bought mine. ;)
 
Zactly, Jay...

When you read some of the descriptions on the e-bay ad, you can almost read the unwritten words. "I bought this and used it two times... almost new" What they are really saying is "I bought this and can't figure it out. I tried using it on my kitchen table and got too damn frustrated. Now you can screw with it, I'll take a loss".

I currently have three 12 fixture controllers (sold one) and am again looking for a new 55. I own a Show XPress, but haven't used it yet... I am having so much fun with the hardware instead. I currently use two in my club gig. One on LED pars and one on scanners.

I would recommend to anyone who is starting out, to begin with a 12 fixture hardware controller. Yes, there is more you can do with the Show XPress, but I'm afraid that a newbie can get too frustrated with it when beginning.

The very basic, simple 12 fixture controllers start around $100, and go up to about $250, brand new. On e-bay, they start at about $50 used.
 
The DMX-55 is a ton of fun :D
 
Over kill...

Stick to the small hardware to start out. With the equipment you are talking about, software is WAY more than you'll ever need. It's like using a Mac truck to haul a kids wagon.

If you ever move up to software, with more gear, then keep the hardware as a backup. I use the "KISS" approach... keep it simple, stupid.
 
I have to disagree. Buying better equipment will allow an easier upgrade. I used to use an Edirol V4 mixer with portable DVD players instead of an AB switcher. Then I got Pioneer's and surprise, I had a video switcher. Light Jockey isn't even that advanced. Its far beyond an AmericanDJ lighting controller, but its nothing like a an ETC Congo or a GrandMA. I prefer to use the approach "Go big or go home".
 
I have to disagree. Buying better equipment will allow an easier upgrade. I used to use an Edirol V4 mixer with portable DVD players instead of an AB switcher. Then I got Pioneer's and surprise, I had a video switcher. Light Jockey isn't even that advanced. Its far beyond an AmericanDJ lighting controller, but its nothing like a an ETC Congo or a GrandMA. I prefer to use the approach "Go big or go home".

Just because you do not have money, doesn't mean you cannot have luxury. There is only one question you must answer. Do you prefer a Graphic environment over a text based one? Think.... Windows = Graphic, DOS = text. It's a bad comparison, but it does work.

Personally, I would go the computer route. This will prevent having to set up all of your fixtures in order to program them. You can use a visualizer (like David said) with a dual monitor setup like I do, but just because you use two monitors at home, doesnt mean you have to on the road. Simply program all your lights and NAME THE SEQUENCES. Being able to name the sequences is one of the BIGGEST advantages. Instead of "Bank 29732387239; Sequence 3," on a hardware controller, you can name a sequence "Slow scan with a Blue hue" and know exactly which sequence you would be using.

Sure, Lightjockey (or Showdesigner for that matter) is expensive, it isnt your only option. You can look into cheaper solutions such as Chauvet's "Show X-Press" or "FreeStyler" which is my personal favorite.

"LightJockey" = $1000-2000
"X-Press" = $400-600 depending where you buy
"FreeStyler" = $50-400 depending on WHICH dongle you buy

(a dongle is the little box that connects the computer to the lights)

I would check out FreeStyler. Seriously. Once you use it, you wont go back. The software isn't recommended by me without having a backup HARDWARE controller as Tyrone said.

If you would like to learn FreeStyler, I wrote a guide. It is located here:

www.freestylerguide.com

If nothing else, this guide will help you further your DMX knowledge by doing sample programming and seeing them come to life on the screen through visualization. This program is free, the guide is free, you have absolutely nothing to lose and everything to gain.

Keep doing what you are doing. Answers can only be given when there are questions.


rlelek


*BTW David, I NV you.... being 14 and broke...just sucks...
 
It's all good. I started out with 1 radioshack mixer and a gem sound turntable. In 3 weeks i'm running a soundsystem 40 feet up in the air. It all depends what you want to do. Do you want to be that DJ who puts on a good show that impresses crowds, as well as other dj's? You can say no and thats fine, but I am hired by other companies because of my work.
I lost a local annual gig here to someone who charges less(and also has developed a local celebrity status) and was rehired after his poor performance.. Once you get your toys you will be happy mr rlelek. I'm only 21 and i've got a few toys to play with. You are ahead of the game.
 
Thanks for all the helpful comments, I am currently bidding on a Chauvet DMX-55. I think eventually I will go with computer software, but since I dont use a laptop at my gigs, or for my gigs, the computer software wouldnt be beneficial for me right now. I DO appreciate ALL the advice though, because eventually I am sure I will be going that direction...
 
I keep vertigo's under my bed in my college dorm just in case i need something in an emergency!

Vertigos.......the old workhorse ADJ spin n' puke lites of the 80's-90's

those pieces are amazing......the lite bulbs never die, the motors seem to go on forever. Like the proverbial Timex watch.....they take a lickin' and keep on tickin'

I just sold my 4-year-old Verti-PROs (updated DMX version of Vertigo, now discontinued) to one of my associate DJs. He loves them.....I was sick of them and needed something new......Can't wait to try out my new DJ Squeeze 2's ($129 each) at my daughter's prom on May 5th.....