Running a with LED pars, Independent of one another

To many ads? Support ODJT and see no ads!

Steve LeBlanc

Mac Daddy DJ
Aug 19, 2006
6,829
192
65
Fredericton, NB
www.frederictonweddingdj.com
Tyrone you may be the one that can answer this...or anyone...

I have my 4 led pars hooked to mt DMX50 controller. I have about 10 scenes programmed. Say I have an Acrobat next in the chain...I want to say kill my pars and run the acrobat solo. Do I need to program another bank of scenes with just the acrobat...or take the 10 scenes and assiogn them to chase I and put the Bat on chase 2. Say the LED's are on and i simply want to bring in the Bat and run it audio active for say a minute then kill it?

I'm looking to run effects togeether and independent almost like I had them plugged into a co pilot....

Thanks
 
Yes...

Everything any light does, has to be placed in a scene. There is one nice thing about the "newer" 12 fixture controllers... like the DMX 55... it can run two or more chases together.

So, all you have to do is record a few scenes (always do at least 8) with your pars and run them into a chase 1. then, run your acrobat in different scenes and put them on another chase. If you don't have the newer version controller, you can still do the same thing by putting the pars in any number of banks, and the acrobat in OTHER banks.

If you want to combine them, then, you can do that in a single chase. Otherwise, run the banks separately.
 
Actually, wouldn't it be possible to grab the the DMX cans on the fly and turn them off or dim them completely? Just push their respective "scanner" buttons and move all the faders to the bottom?
 
I wish I could tell you... GOOD QUESTION...

I've never owned a controller that allowed you to "grab" one fixture with a joystick. I'll will find out.

I will venture a guess now, however. The joystick on the fly fixtures allows you to grab one fixture, so unless your cans are all the same address, I'd guess that your suggestion won't work. And, as I recall (might be wrong) that the joystick only allows for pan and tilt.

I believe that what you suggested Jay, must be done' while in the "program" mode... Unless someone here knows for sure... Anyone?

I have a gig to get to, but I will get back to this later tonight, and answer your question.
 
OK, I read the DMX 55 manual...

Everything I said above is true.
 
So Tyrone the correct answer is say...put a set of scenes with my led pars on chase one, put the Acrobats on chase 2 (can they just run their preset patterns to audio from the dmx controller) and the 2 Chauvet Ocieana on other bank....I can toggle back and forth; one on, two off, etc......

Thanks
 
Yep...

After reading about the 55, there are a few nice features that I liked. It seemed just a tad harder to understand, but if you were "INTO' it, I don't think it would take much more effort to learn this controller.

Personally, I don't think anyone would use the joystick as much as you might think. Once you have your show set up, using the joystick as a follow spot function would be "fun" at first, but would be more work than it's worth.

Best feature, in my opinion, is the ability to use more than one chase at a time. I can see using this all of the time, much as stated in the above examples. I just bought a "Show Xpress" and will be putting my efforts into learning that for a while. It does everything... maybe another book in the works....nah.