Wanna see my rack? :)

To many ads? Support ODJT and see no ads!
What can I say .. Nice Rack !
 
Great looking pair (of amps that is), love the padding.....
 
ZX5s, tx2181s, mach ms218ts, zx1s for the most part. I normally for my mobile gigs run 2 zx5s off the top amp and 2 tx2182s off the bottom. Occasionally I will run 4 zx5s and my 4 dual 18s all together for bigger party. Then for my corporate stuff (lounge tents, small clubs etc) I will run 6 zx1 passive, 2 tx2181s and 2 zx1a's for monitors. :) Sorry crappy iphone pic. This is a 4 speaker setup load in. From left to right tx2181, mics in skb case on top, front board (acrylic), tx2181, amp rack, white box - wires, black box on top - 2 vue 2s for a basic light show, big black box -2 zx5s Obviously turntables and mixer on a aluminum stand (technichs M5Gs with 909 and sl3) Macbook pro to run it all. :)
View attachment 25971
 

Attachments

  • Basic load in.jpg
    Basic load in.jpg
    223 KB · Views: 54
JustJay said:
ZX5s, tx2181s, mach ms218ts, zx1s for the most part. I normally for my mobile gigs run 2 zx5s off the top amp and 2 tx2182s off the bottom. Occasionally I will run 4 zx5s and my 4 dual 18s all together for bigger party. Then for my corporate stuff (lounge tents, small clubs etc) I will run 6 zx1 passive, 2 tx2181s and 2 zx1a's for monitors. :) Sorry crappy iphone pic. This is a 4 speaker setup load in. From left to right tx2181, mics in skb case on top, front board (acrylic), tx2181, amp rack, white box - wires, black box on top - 2 vue 2s for a basic light show, big black box -2 zx5s Obviously turntables and mixer on a aluminum stand (technichs M5Gs with 909 and sl3) Macbook pro to run it all. :)
View attachment 25971
Click to expand...

For my midsized events i use the Tx2181's as well. i LOVE those subwoofers. Great power and tone! For those subs and the entire Tour X line we run though we use the EV Q1212 ( each dual 18 gets its own Q1212. and the EV Q99 Amps ( We use these for the single 18 tour x subs AND the Single 15 Tour X tops. I use the EV CP4000's and the EV CP3000's for our Larger EV Phoenix rig ( Each Dual 18 gets a CP4000 and each dual 15 top gets an EV CP3000. Love the pics and your gear :)
 
Loneavenger, Since you have all this sweet gear I have a question for you. You may know the answer. I know the cp4000s can go 2ohms, I have yet to try this out by the way. Can I run 4 tx2181 from 1 cp4000s, 2 on each channel of coarse. I have a cp3000s also that when I run all four subs I ususually run my zx5s on the 3000 and each set of duals gets a 4000. I much prefer to have the 4000 for the tops also but I have no need really to go out and buy another.
 
I had qsc 3602s and they were great on my mach subs but then I on my highs (at the time rcf art 315s) They just screamed a bit too much for me. I re did my whole set when one day I was at the sound shop by me and I walked in front of a zx5 that was playing through a 3000 and it didn't bother my ears at all. My sales guy laughed as I went over to it and wrapped my arms around the zx5 and put my ear to the grill. I said " I need this!"
 
You must log in or register to reply here.
Top Bottom
Back