My system a couple of additions.

To many ads? Support ODJT and see no ads!

drzinc

Trini missing JTV
Jun 7, 2008
4,055
2,586
Toronto
www.drzdj.com
Slightly modified my system added some new stuff.

First addes is a new wireless mic system. Its a 2 mic system dual diversity with four antennas.

Second addition is a 1U digital amplifier (300 wrms per channel) to play monitors when I need them or to bi-amp my tops.

Third addition is a rack draw to keep odds and ends.

Fourth addition is a new rack to house it all in.

systemv3.jpg
 
looks heavy, and it seems that the mixer would be crazy uncomfortable to use like this...

What are you trying to solve with this rack? Is it mostly for FOH live sound?
 
looks heavy, and it seems that the mixer would be crazy uncomfortable to use like this...

What are you trying to solve with this rack? Is it mostly for FOH live sound?

I kind of agree.

The mixer in that position to me would be a nightmare to operate.
 
As explaned before the mixer is used as a preamp before the eq. I always like to have a preamp in my signal chain. Whats hooked up to the preamp is...
My source (either a Hercules RMX or Numark NS7)
My mics (each one has its own channel)
My ipod (as my trusty backup)
On occasion i add a keyboard if the client needs it for their singer so another channel is used.
THe mixer is high enough to make quick adjustments.
 
Hey DRZinc, How long have you have your behringer crossover? I have a friend that has a large sound compamy and had 30 of those units and within 2 years everyone had failed.
 
Hey DRZinc, How long have you have your behringer crossover? I have a friend that has a large sound compamy and had 30 of those units and within 2 years everyone had failed.

3 Years...
 
As explaned before the mixer is used as a preamp before the eq. I always like to have a preamp in my signal chain. Whats hooked up to the preamp is...
My source (either a Hercules RMX or Numark NS7)
My mics (each one has its own channel)
My ipod (as my trusty backup)
On occasion i add a keyboard if the client needs it for their singer so another channel is used.
THe mixer is high enough to make quick adjustments.

What make and model is the rack?
 
Hows the Wireless Mics? Are the compliant for the 700 freq?

It operates in this frequencies...
Carrier Frequency: UHF 740MHz - 860MHz
Works very well this is the second set of mics that I have bought from GTD audio.
 
Nice system. I like the idea of having all in one, but is it heavy?

I know you asked him but I'll chime in. It is probably some good weight in there. However, since he and I come from the same country, we can tell you some stories about some Mobile DJ setups. How about having to lug speaker boxes with 4 18" woofers on each side, all in one cabinet. You have to have a road crew just to move your stuff. For our Carnivals, (Y'all call it Parades), one DJ will be on a Flatbed 18 wheeler truck. Kinda like what Val has except hers is a more polished look.
We choose gear first then worry about weight afterwards! :sqbiggrin:
 
Nice system. I like the idea of having all in one, but is it heavy?
THat's what wheeles are made for. Roll it up to the van and it slides right in.
 
I know you asked him but I'll chime in. It is probably some good weight in there. However, since he and I come from the same country, we can tell you some stories about some Mobile DJ setups. How about having to lug speaker boxes with 4 18" woofers on each side, all in one cabinet. You have to have a road crew just to move your stuff. For our Carnivals, (Y'all call it Parades), one DJ will be on a Flatbed 18 wheeler truck. Kinda like what Val has except hers is a more polished look.
We choose gear first then worry about weight afterwards! :sqbiggrin:

I did Caribana (Toronto's carnival)for years. I stopped doing it an a yearly basis but I do one every so often. Believe me this is a small setup compared to the old days. Remember the big SAE amps? It was one rack for processors and one or two for amps.
here is some pictures of sae stuff...
p500_front.jpg


P250.jpg
 
I did Caribana (Toronto's carnival)for years. I stopped doing it an a yearly basis but I do one every so often. Believe me this is a small setup compared to the old days. Remember the big SAE amps? It was one rack for processors and one or two for amps.
here is some pictures of sae stuff...
p500_front.jpg


P250.jpg

yep I remember them. I had some friends who used SAE Amps and PreAmps!