Learning the "X-Box"...

To many ads? Support ODJT and see no ads!
G

Guest

Guest
I think the learning curve is high on DMX. I feel quite proficient with the 12 fixture hardware controller, but I'm not well versed on software... While I've played with the x-box and comp-u-ware programs, I've never gotten very far. I resisted looking at any software because I've been able to do everything I needed with my 12 fixture controller.

However, I think as a moderator, I aught to be more versed in the software programs. So, I spent the other day playing with my downloaded (free "show X-press") program and started getting into it. The download is free, but the "interface" is where they get you... typically over $400.

I had to enter some "parameters" of some fixtures, but it was easy once I did it for the first time (it really helps to know how to fully operate the hardware controller first). I'd like to put posts here regarding my adventures of the x-box software if there is enough interest.

I did get one show loaded and set my stage with all of my truss and fixtures... BTW, the 3D viewer is amazing! It allows you to fully program a show at your computer, without hooking up a single fixture. The 3D viewer even shows the color changes and gobos as though you were actually at the stage.

So, if anyone wants to know more, I'll take all the input I can get, and I'll continue learning this program and share what I've learned.
 
Have you played with Martin LightJockey? It's the leader in this sort of control, and I have found it to be alot more user friendly than the cheaper programs. It's also a free download to play with the software only.
 
okay, we're going for a tripple threat, i've worked with Elation's CompuPro, which is SunLight for those who know the real author, you can download his free program (which esentially is elation) from http://www.nicolaudie.com

it's what I've used since I started out in the biz, a wee 8 years ago.
 
Tyrone, et al:

I am slowly working my way over to DMX lighting and will be attending classes right here on these forums to gain as much information and feedback as possible...before I make the financial investment to upgrade my lighting.

I may not have anything to offer, but I greatly appreciate your knowledge and experience in working with DMX and lighting in general..

Carry on, gentlemen...I am ready to learn!

PS: Tyrone...Thanks, again for the "DMX for DJ's" booklet. :)

:thumbsup:
 
Keep the input coming...

I sat down again and played with my "X" program. I put three 15 foot trusses on the ceiling and started mounting fixtures on the 3D viewer.... it's very cool! I then had to select which fixtures I have in my arsenal and make sure the parameters matched in the data bank (the newer versions of the software have a lot more of the newer fixtures) with what the fixtures really do.

I discovered that my XP-3's were in the data bank, but the parameters were set wrong, so I had to re-adjust them (not that hard). I also added some 4 channel color changers, which were also not in the data bank. I then had to fly the fixtures and make sure they were pointed in the right directions. The program will let you put any fixture in any position you want. Turns out, I had them upside down and didn't know until I activated the lamps. Took me a minute to turn them around (this is all done on the computer screen).

After about an hour building my stage and flying my fixtures (BTW, the program sets all of your address automatically and shows you which dip switches to activate on the real fixtures... very nice feature), I started to set up some scenes.

I then got some scenes to "run" in a show. It looked very cool to watch it move and change colors right on the screen, which is a great feature. You can program an entire show without setting up any gear for real.

There is a "builder" screen where you adjust your fixtures and build your shows... and now I'm going to work on the "run show" screen. Not too sure how that works yet, but I think you can pick out a multitude of different shows on this screen... I know there is that ability, but I haven't gotten that far yet. I'll keep you posted.
 
Tyrone, et al:

I am slowly working my way over to DMX lighting and will be attending classes right here on these forums to gain as much information and feedback as possible...before I make the financial investment to upgrade my lighting.

I may not have anything to offer, but I greatly appreciate your knowledge and experience in working with DMX and lighting in general..

Carry on, gentlemen...I am ready to learn!

PS: Tyrone...Thanks, again for the "DMX for DJ's" booklet. :)

:thumbsup:

I'll 2nd that motion!!
 
I'm taking the next step...

I've ordered an "X-Box" from Centerstage lighting. I'm going to add another laptop to my arsenal and put all of my music on it, and install the X-box software on it as well. That way I'll have a backup music source, and control of my lights in one package. I'll still run my music from the first laptop.

So, now I'll be carrying two laptops to my gigs, and I can leave the Ipod at home.

As I go through setting up my stage, I'll keep you posted of my progress. Having played with the free download, I think I may have it up and running fairly fast. At least I hope so.

I'll do a step by step thread as I get up and running, incase anyone wants to take notes. Stay tuned.
 
I got stuck and called Chauvet for help...

I got in touch with the Chauvet Guru, who blew me off on the phone. He told me that he sells 30 "Show XPress" units a month and has never gotten a phone call for help.

I may be looking into the "Light Jockey" if I can return this unit.
 
Centerstage offer...

I gotta tell you, that every time I deal with Centerstage, I come away feeling that they "GET IT". They offered a full refund and apologies.

They stated that they have a new guy starting on Monday, who understands software and would put me in touch with him then. So, for now, I'm gonna hang onto this program, and see if I can get it straightened out. You just can't ask for better customer service than that!

ANYONE who uses this software is welcome to chime in here... I'm sure lots of us would like to hear about it, and learn about it.

And, if I ever get this down, I'm going to add a new chapter to my book, and send it to everyone who bought the first one (pro bono).
 
Out of frustration and desperation...

... I played with the system again all Saturday morning. Turns out, I got bad information from Chauvet. They told me to put a switch in the wrong position. I had to re-load the software three times and re-install drivers.

I also joined the site software member forum and no one there is willing to answer questions. I suspect that the mentality there is that they are experts and I'm only a DJ.

So, after several hours of playing, I finally got a light to really move to my commands.;.. yahoo! The tutorial is terrible... Not user friendly and difficult to understand... NOT for a novice!

NOTE: this program is not user friendly!!! The ads say that you'll be controlling lights in no time... I'd agree NO time will you be controlling lights.

This program is confusing and difficult to understand. I am not making a recommendation on the Show XPress software. I am considering writing another book, with the exact steps... but I think it would be more time consuming that I have time...

If you have more fixtures than your 12 fixture controller will handle, consider buying a second 12 fixture controller before you consider the Show XPress...
 
I consider myself pretty smart...

I would have to wonder, is ANYONE has learned the program from just reading the tutorial? I don't think so! My suspicions are that you'd have to learn it from someone who already knows how to use the software.

I base this on the fact that I am lost when using the tutorial, and I'm fairly smart. Maybe there is a class somewhere that teaches it, but the tutorial SUCKS!

It's very possible that a "techy" operator would have more luck with the instructions...

But, I'm still "trudging" through this. There are some very nice things that it does... if you can figure it out, of course. I know a guy who owns a DJ gear supply company here in MN, who operates the software for some very big clients, but doesn't know how to control all of the functions... makes you wonder how many units are really out there.