What the heck is this noise?!?

To many ads? Support ODJT and see no ads!

Briar

New DJ
Sep 1, 2006
557
0
65
Fairborn, Ohio
I ran a (ground loop protected) RCA cable from my mixer to the 1/8th mic input on my laptop to do my recordings.

When I try to record, I get a noise that sounds (almost) like a heartbeat.
I use audicity and can visually see this noise as well as hear it.

I tried turning off everything except the mixer and still hear it (record it).
I switched cables with no luck.

Is it my sound card or the mixer?

Thanks for any input you can give.
 
First, I have to ask you what is a ground loop protected RCA cable?

Noise is a very common problem when connecting laptops to line power operated equipment. In most cases, an isolation transformer will solve the problem. What happens when you run the laptop from just the battery? Does the noise go away?

Good Luck.
 
Ok, I tried running on just the battery and that did not cure it. The noise is actually a lot faster than a heart beat. It probley "pops" 5 or more times a second.


First, I have to ask you what is a ground loop protected RCA cable?

It is actually called a ground loop isolator.
I have had a noise problem in the past when more than one electronic device uses a common ground. The noise is created when the ground exits in more than one place and creates a loop.

(I am not really that smart. I just had a problem in the past and that is how is was explaned to me. I have used the isolators every since)
 
It isn't a matter of being smart it is just a matter of knowing and right now you have me stumped without seeing the problem or more information.

If you can run the laptop on battery and still have the problem it is unlikely to be a ground loop because there is no common ground.

So it doesn't happen with another device, say when a MP3 player is the program source? And it disappears when the 1/8 mini from your laptop is removed? Right?

And you don't hear it if you are listening to that laptop jack with headphones, correct?

Take it a step at a time and eliminate each element as the possible problem.
 
Well, I just eliminated the mixer. I don't know why I didn't try this first....

I tried the laptop "stand alone", not connected to any of the DJ system, and I still get the noise.

I opened audacity and started to record (via the built in mic) and its still there. And I even tried running on just the battery. No luck. :(
 
MORE INFO!!!!

I was smiling as I yelled that! You didn't mention if you are using an internal, external (USB) or PCMCIA sound card. If you have an external sound card try working off the internal (for trouble shooting). A lot of internal sound cards are very noisy though. The one in my dell is quite quiet but about 20db more noisy than my PCMCIA or USB card but still about 50db down. The internal sound card on my Compaq is very noisy, not usable for professional purposes. It, your problem may just be the way things are.

So is it internal, an integrated (on the Motherboard) card? Or is the noise on an external card?

Bounce, didn't he say he disconnected the mixer and still has the problem. If so, the cable can't be the problem. Right Briar, you listed to the jack via Earphones?

Oh, another thing is it a line or mic input. Many laptops don't have a line in only mic in.
 
Yes, it is in the laptop. Everything else is disconnected.

I use the internal sound card on an Acer Aspire 3003wlic.

It is odd though.....
I haven't made a recording in a month or so but it was fine the last time I used it.
The machine is a little over a year old with over 60 gigs/events on it though.
 
Briar, I was hoping to chat in the shoutbox to get more details but you took off on me.

You're right, if it worked once it should work again so let's assume it may be a ****pit problem. Something might have changed. It is easy to get the levels changed misadjusted on input or output. Make sure you are using the appropriate input. Is it line in or mic in? Do you have a line in going into it? If the line in or mic in is wide open (no attenuation) you might be listening to noise it was not possible to hear before at more moderate levels. Experiment!

Double check everything. Adjust the levels. Check the input options on your software. In the long run get an external card. Lots of people make fun of them but I have a Creative Audigy2 ZS and it works fine. Picked it up on E-Bay for less than fifty dollars.

Good Luck. Drop a line if you need more help.