Building a subwoofer

To many ads? Support ODJT and see no ads!
It's funny you should mention that. I have a jack plate with dual speakons that ordered quite a while ago that never got used. :sqbiggrin:

Interior dimensions are 14.5" D x 23" W x 23" H which is roughly 4.5 cubic feet.
 
Brother Wiz, I understand that I'm going off topic here... and beg forgiveness. :)

If it's a tight, punchy bass response you want, why not consider a pair of dually 15" boxes?

You can get them already made, (used for a good price) and they'll definately rattle the walls with some amp headroom behind them. The 15s will give you a nice, tight thump. :)

Thoughts?
 
Tell me more brother Fred! :sqbiggrin: And PLEASE don't ask for MY forgiveness.

I have a thirst for knowledge and one way I've learned over the years is by trying lots of different things, but mostly by hands on experience. Sometimes I make mistakes, sometimes I have to try two or three times, but I come away with a better understanding and some experience. Can I learn from other peoples' experience, FOR SURE, but sometime you have to try out your ideas to see if they can work.
 
Just some points (I certainly don't want to get in your way LOL)

1. has already been made...... the cabinet does not have the volume for a sub.

2. the first thing you have to do is pull the casters off of the cabinet and replace them with rubber feet! Why you ask? Well unless you get a thrill out of watching the cabinet pulse back and forth with the action of the woofer then it needs to be done! Why does it do this you ask? To tell you the truth it is all about the theory that for every action there is an equal and opposite reaction! When the woofer pushes out the cabinet will roll in the opposite direction, this does two things, it reduces the response of the woofer and it is funny to watch!
 
That's understandable. I made a lot of mistakes, gear-wise before listening to folks in the biz who'd already been there and done that. I guess I had to find it out for myself, lol. :)

Radio Shack's home stereo cabinets were OK for the VFW with 50 people. They were pipsqueak for a school dance. Gemini is overpriced for no more than what it does and no longer than it lasts. A professional power amp dissipates more power and costs less than three cheap 100 WPC amps. Less weight to load, too.

I never tried building or modding speaker systems but I did try building my own rack case. It was so darn heavy, it was all I could do just to get it off and on the back of the truck. After a hernia surgery I got me some SKB cases. :)

I listened to folks who used them and got a pair of Carvin's entry-line dually 15" cabinets. Entry-line for bands, perhaps but they're the cat's pajamas for DJing. Fed each with nearly double rated power capacity. Eased that slider up and the rafters rocked. I bi-amped 'em with the dually 10s for tops... have never run them full-range.

We turned 'em loose at the Curves Bachelor Auction shows. I went to the mens for a pee break and could feel the walls in the restroom vibrating, a good 50 yards away. They're factory loaded with Eminence bass drivers and B&C horn drivers. People coming in the doors could hear the bass thump.

Not a bad purchase decision at all. :)
 
Just some things to consider as you pick the driver for your new box!

efficiency bandwidth product
speaker resonance frequency
speaker electrical Q
speaker total Q at fs
air volume with same acoustic compliance as the speaker suspension
box or enclosure tuning frequency minus three decibel half power frequency
air volume with same acoustic compliance as the speaker suspension
box or enclosure volume
speaker resonance frequency at peak sound pressure level
speaker total Q at fs
equivalent air compliance
sound pressure level
free air reference efficiency
maximum air volume displaced by cone excursion
cone effective radiation area
cone peak linear displacement
cone effective radiation area
cone diameter plus one third of surround
port or vent length to volume of enclosure
end correction factor
minimum port or vent diameter
maximum air volume displaced by cone excursion
Box tuning frequency
 
So where would I go about finding information about how many cubic feet a speaker needs to produce certain frequencies?

Is there an online guide or reference that I can read that deals with speaker building?

I'm still leaning towards a 15" Black Widow and I'm going to look into what's available from EV although I'm sure it will be expensive.
 
Wiz, check your PMs. ;)
 
You'll need the box specifications, then a program to plug in different drivers to see which one would work best in a box of that particular size. You might find one that will work fine with it. There are many programs out there that will give you the ideal box size for a given speaker. There are so many variations of cones, coils, and other paramaters that need to be taken into account when putting a speaker into a box to make sure it will perform adequately before you take the plunge and spend the money.
 
A decent and free program is winisd.

And though you are not looking for it, many of us has tried experimenting with DIY speakers. Sound reproduction is a science. Since others has done much of the work, you should take advantage of their advice. Nothing worse then dumping time and resources into something that sounds like crap.
 
Ok, since I'm experimenting I'm going to take a 15" driver out of one of my 2 way speakers and fool around. I have seven different speakers to choose from, a Community, a pair of old Peavey 115H and four "generic" 15" inch speakers. All of them cost me very little money so if I screw something up, no big deal. then I need to figure out how to hook up my crossover or read the manual on my Peavey PV-1500 amp which has a built in crossover. This should be interesting.
 
Ok, since I'm experimenting I'm going to take a 15" driver out of one of my 2 way speakers and fool around. I have seven different speakers to choose from, a Community, a pair of old Peavey 115H and four "generic" 15" inch speakers. All of them cost me very little money so if I screw something up, no big deal. then I need to figure out how to hook up my crossover or read the manual on my Peavey PV-1500 amp which has a built in crossover. This should be interesting.

I think that is a good idea, you'll be able to hear first-hand how the different speakers react differently in the same box, and if you've already got them on hand and have the time, then it's a good experiment.
 
Another cool piece of software (and is free) is REW - (room EQ Wizard). It's typically used to tune a room and help with subwoofer placement/acoustic treatment. However, it would work near mic'd to help the frequency characteristics of the box/driver combo. You can find more info here.
 
Just some things to consider as you pick the driver for your new box!

efficiency bandwidth product
speaker resonance frequency
speaker electrical Q
speaker total Q at fs
air volume with same acoustic compliance as the speaker suspension
box or enclosure tuning frequency minus three decibel half power frequency
air volume with same acoustic compliance as the speaker suspension
box or enclosure volume
speaker resonance frequency at peak sound pressure level
speaker total Q at fs
equivalent air compliance
sound pressure level
free air reference efficiency
maximum air volume displaced by cone excursion
cone effective radiation area
cone peak linear displacement
cone effective radiation area
cone diameter plus one third of surround
port or vent length to volume of enclosure
end correction factor
minimum port or vent diameter
maximum air volume displaced by cone excursion
Box tuning frequency

now, you're just showing off!

(I am kidding, Thunder...and I'm not helping the thread)
 
I actually found a couple of 15" Black Widows today on Craig's list for $115, but when I called the guy said he got them like 10-15 years ago and they were in home made cabinets. He didn't know if they had come out of other speakers either. It just sounded like they were old and maybe had been used hard for a long time, I really don't need that.

I am definitely going to try one or two different 15" woofers from my backup speakers and see what happens.
 
I borrowed this from another forum

Heres the specs if you plan on using 18 Black Widows Wiz
 

Attachments

  • PV_low_rider_18_boxes.png
    PV_low_rider_18_boxes.png
    46.9 KB · Views: 5
Probably doesn't help, but just confirms -- I use the 15' Peavey Black Widows but bought as Impulse 1015's (not built). They are GREAT.... love them

In speakers/subs - I can't match the quality/price (no intent to open a debate here):sqerr:
 
No, I won't be using an 18" Jeff. I've decided to just experiment with 15" woofers and see what happens. Since I'm using this cabinet that is already built I won't need any design software for this project. Either it going to work and sound good or it won't. I'm not going to do major modifications to the existing cabinet. This is for my personal knowledge and experience. Hopefully I learn something whether it works out well or even if it sounds bad.

I considered getting Peavey Impulse subs at one point and they're not completely out of consideration. I like plastic cabinets and I've heard that the Peavey Impulse subs sound good.