Denon OEM'd Product?

To many ads? Support ODJT and see no ads!

eezee

New DJ
Did Denon finally just buy a OEM generic mixer from China and slap their name on it or did the supplier who provided the mold/ tooling and sell the design behind Denon's back which if that was case, they could be sued.

The price difference is amazing too.
Denon - $299
Marathon - $169
and $99 here(scroll down the page):
http://www.cheaplights.com/cart/page64.html

It may well be that the inside components are different but it would also be Naive to think that maybe they arent and we are just paying for the Denon brand.

Makes me wonder if there is a DNx500 twin out there.

Also, if you liked the old Numark CM200 mixers, Marathons new mixers are the whole old CM200 series since Numark released the new C3 series. Marathon didnt even try to change the name - its called the DJM200 series.
http://www.sixstardj.com/marathon5.html
 

Attachments

  • denon.jpeg
    denon.jpeg
    12 KB · Views: 14
  • Marathon.jpeg
    Marathon.jpeg
    22.8 KB · Views: 13
Did Denon finally just buy a OEM generic mixer from China and slap their name on it or did the supplier who provided the mold/ tooling and sell the design behind Denon's back which if that was case, they could be sued.

The price difference is amazing too.
Denon - $299
Marathon - $169
and $99 here(scroll down the page):
http://www.cheaplights.com/cart/page64.html

It may well be that the inside components are different but it would also be Naive to think that maybe they arent and we are just paying for the Denon brand.

Makes me wonder if there is a DNx500 twin out there.

Also, if you liked the old Numark CM200 mixers, Marathons new mixers are the whole old CM200 series since Numark released the new C3 series. Marathon didnt even try to change the name - its called the DJM200 series.
http://www.sixstardj.com/marathon5.html
While I agree the similarities are strikingly similar... but then again these are very basic mixers with a very basic if not generic layout...

I seriously doubt they are anywhere near the same quality mixer.

All I can say is buyer beware.
 
For $99 bucks that 2 channel 19" rackmount wouldn't be that bad of a buy. I believe that it could be the same product.

It's the same thing they say about television or lcds(forget exactly)...theres only 2 manufactuers and then brands buy em and slap thier logo on them.....


When I first started dj'ing I had 2 lineartech BD-1600 turntables, I just recently did a search just to see what was on the internet about them and found that the EXACT turntable is sold under the brand GLI. Same thing, different name.
 
While I agree the similarities are strikingly similar... but then again these are very basic mixers with a very basic if not generic layout...

I seriously doubt they are anywhere near the same quality mixer.

All I can say is buyer beware.

Rob, this is a 2U 19" mixer.There are not many 2U rack mount mixers out there and Denon was supposed to be unique in that sense.They were supposed to be the only 2U mixer in the market. There may be more 1U Rack mount mixers than 2U.
The layout is more than strikingly similar. Other than the Denon logo and the color of the knobs, they are identical. Qualiy may be suspect in the cheaper versions but who knows? Similar versions maybe attributed to coincidence but not identical clones of a supposedly very uniqe product from a brand like Denon.

Denon is now made in China in their supposedly "own" factory but who really knows when stuff like this surfaces.
You expect this from American Audio, Stanton and whatever they are branded as overseas. You do not expect it from Denon.

But like you said, buyer beware. On the other hand,Marathon could have just bought the casing and slapped in their own innards. :sqlaugh:
 
Very similar, and maybe even produced at the same factory... but what's under the hood is likely not the same.

Example: Denon provides the specs to factory. Factory builds them, then takes the design and uses inferior-grade components to build a cheaper version. Or, Marathon goes to the factory and says "we want this, but cheaper". The end result is a product that looks a lot like another, but isn't.

Marathon is quickly building a reputation of low-priced gear that looks like the fancier stuff... their cases are blatant Odyssey copies, and their mixers are obviously based on Numark and Denon designs.

FYI - Marathon is owned by Six Star DJ.
 
thanks Bren I liken it to the copy cat specialists which starts with a B.

Also notorious for reverse engineering. ;)

I ran my EP2500 vs. one of my RMX2450 (No measuring just my ears) and even though it's close the thump out of the cabinets Yamaha S115V's was harder hitting with the QSC. I then switched the RMX2450 for my RMX1850HD and the EP2500 hit a little bit harder so I would place the EP2500 between the 1850HD and the 2450.

It does look like reverse engineering on behalf of "B" but the 1 year warranty vs. the 6 year warranty is worth the extra cash for the QSC. Don't get me wrong the 2500 can hold it's own but a QSC it ain't. Would I buy another EP2500? Yes as a good cheap backup or to even use it live it's just a preference thing for me.
 
Very similar, and maybe even produced at the same factory... but what's under the hood is likely not the same.

Example: Denon provides the specs to factory. Factory builds them, then takes the design and uses inferior-grade components to build a cheaper version. Or, Marathon goes to the factory and says "we want this, but cheaper". The end result is a product that looks a lot like another, but isn't.

But DENON claims to own their own factory in China. A DENON run facility in China. Not just some third party manufacturer.

If Denon owns the plant, they have to own the tooling and the design, then how was Marathon able to secure the casing of the Denon and the design as stated above. Shouldnt there be a lawsuit by now. Im just wondering if Denon has started to sell OEM built products that have EXACT look alikes.
Or they dont really exclusively own a factory in China.


The Behringer EP2500 is a blatant reverse engineered QSC RMX. But the case though similar is clearly not the QSC. Imagine if Behringer used the same QSC casing? Huge lawsuit.

Its almost like Gemini using the Pioneer CDJ 1000 case and slapping their own internals and calling it a day. Not gonna happen.
 
Remember Denon Allen&Heath are own by one parent company D&M and who knows what other small companies they have a hand in. They also own the legendary McIntosh Labs.
 
But DENON claims to own their own factory in China. A DENON run facility in China. Not just some third party manufacturer.


Just because Denon owns (or claims to own) their own factory doesn't mean they use it for 100% of their product line.