Powered vs Non Powered Mixer

To many ads? Support ODJT and see no ads!

ahoustondj

Mac Daddy DJ
Aug 13, 2007
20,235
3,465
Texas
What are the main differences, pros & cons between non powered and powered mixers?
 
Well.... depending upon your needs and the models available, a powered mixer or powerhead is an all-in-one unit. Most models contain preamplification, processing, mic circuitry and power amplification in one package. Mics and instrument pickups are typically patched direct to the powerhead inputs.

A powered unit may be used with a larger FOH by patching line out from the powerhead to the amp racks. Internal amp channels are often used for stage monitors or wedges.

A non-powered mixer typically offers the above, less extensive processing and power amplification.
 
The biggest differences between powered and nonpowered mixers!

1. Powered mixers allow you a smaller (and faster) setup! On par with powered speakers!

2. Powered mixers limit you to a given power and/or configuration (unless you do as suggested above in wiring an out to a seperate system). On par with powered speakers!

3. Using a powered mixer (alone) is putting all your eggs in one basket. If one componet goes out you have lost everything! On par with powered speakers!

4. Powered mixers are generally a lot heavier than non powered mixers! On par with powered speakers!
 
I have found that powered mixers are perfect for the mobile karaoke rig especially when a mobile is working in different clubs each night. I have been using Yamaha and Behringer powered mixers for years. Amazingly I prefer the Behringer EMH2000 over my Yamaha EMX300. It just sounds clearer is a bit louder, doesn't clip as easy and the effects processer is better for vocals. I do keep a spare in the car in case of a problem, but in 6 years with it, it has been flawless. Now my Berhinger Emx3000 is another story. I lost one side of the internal amp and am now forced to use an external amp with it. I was amazed at the improved clarity when using the external amp tho which just goes to show the Berhinger internal amps aren't very good to begin with.

But back to the point, most powered mixers are very good for small... up to 100 people or so sizeed events. But you can link additional amps if more headroom is needed. Plus a lot of the time you can pick up a good powerd mixer for less than a quality mixer and amp combo. Very good for those just starting out.
 
Yup, that's the sweet part about powerheads. Just plug in yer mics and other inputs, connect up speaker cables and you're ready. They may be used with active cabinets, too if that's your preference. :)

Some models offer multiple amp channels for PA and stage wedges. They're designed for use with mics and instruments and are quite versatile when you're micing vocals.
 
The biggest differences between powered and nonpowered mixers!

1. Powered mixers allow you a smaller (and faster) setup! On par with powered speakers!

2. Powered mixers limit you to a given power and/or configuration (unless you do as suggested above in wiring an out to a seperate system). On par with powered speakers!

3. Using a powered mixer (alone) is putting all your eggs in one basket. If one componet goes out you have lost everything! On par with powered speakers!

4. Powered mixers are generally a lot heavier than non powered mixers! On par with powered speakers!

5.Powered mixers usualy have less futures

6.Powered mixers mostly dont have crossfader

.............

But as Thunder say:Much faster setup and easy to move around.With Powermixer you need just 4 things:powermixer,2 speakers and the bag with speakerstands and chords,...thats it
 
Picked up a really nice Carvin powered mixer that really kicks some butt. :)
 
Pyro, that's a typical non powered setup and IMO the most common way of doing it. Add a power amplifier and you're complete. The usual set up is Mixer, Amplifier, passive speakers. Cables go from you music source like a CD player or laptop to the mixer and other cables to the amp and then a third set of cables from the amp to the speakers. If you want good sound don't buy Kustom speakers.

An easy way for you to go is to get a pair of powered speakers. They have the amplifier built into the speakers so all you need is the mixer and speakers, no separate amplifier is needed. Then you just hook your CD player or laptop into the mixer, hook the mixer up to the speakers and you're playing music. Lots of people are going this way.

Don't scrimp on the speakers, they're the most important part of your system and a pair of cheap, crappy speakers just won't sound very good. Go to Carvin.com and look at their speakers. They're not expensive and way better sounding than those Kustom speakers. Electro Voice Force are very good entry level speakers too, way better than Kustom. A brand new pair of Yamaha S115V speakers are about $650-$700 and will last many years and they sound GREAT. Do your homework.
Even a pair of 12" speakers might work fine. Go listen to a bunch before you buy . . .
 
The problem with that is that im a university student and this is for a home sound system... i dont really have any money so this is really all i can aford... so your saying this wont work unless i get an amp?
 
The problem with that is that im a university student and this is for a home sound system... i dont really have any money so this is really all i can aford... so your saying this wont work unless i get an amp?

That pretty much covers it! You need an amp! If you don't have one you simply have extra seats for your buddies at the beer party!
 
Thanks Thunder :)

Well, i know you'd probably be against it but I'm going to have to get those speakers, only because they are cheep and the shipping on top of it all is going to be 100$ (I live in Canada). This is by no means going to be put under "heavy usage" all i really plan on doing with it is hooking it up to my computer for the sake of some nice computer speakers. Would you know of a good powered amp that is also cheep->moderately priced (with what im looking to do with it anyways).

To be more specific with what kind of use, its more for me to play around with, listen to pre-recorded music, maybe a little computer dj'ing so-on. There wont be any guitars (so to speak) plugged into it.

Thanks again
~Cody Woolaver
 
Pyro -

I suggest taking a look at buying used gear if you are on a budget - craigslist, or even a PA rental place might sell you some quality used gear. If you plan on dj'ing for any amount of time, buy quality equipment - you'll see a lot of posts from others here regretting cheap equipment purchases.

Do not buy a cheap Amp - you'll just end up replacing it. A quality amp will last years - or decades.

Just my 2 cents,

-Joe
 
This is an interesting debate...Dynacord makes the only powered DJ mixer that I am aware of. It sells very well in Europe, but we have not introduced it to the Americas (in my opinion it is underpowered 2 X 300 at 4 Ohms).

MP7 - http://www.dynacord.com/wDynacord/en/produkte/familie.php?market_id=1&category_id=5&family_id=31

I personally prefer passive rigs, but I have always wondered how well this might do as an alternative to powered loudspeakers.


If this was available with an adequate amount of power, would you consider using it?
 
This is an interesting debate...Dynacord makes the only powered DJ mixer that I am aware of. It sells very well in Europe, but we have not introduced it to the Americas (in my opinion it is underpowered 2 X 300 at 4 Ohms).

MP7 - http://www.dynacord.com/wDynacord/en/produkte/familie.php?market_id=1&category_id=5&family_id=31

I personally prefer passive rigs, but I have always wondered how well this might do as an alternative to powered loudspeakers.


If this was available with an adequate amount of power, would you consider using it?


If this put out about 300 watts per channel @8 Ohms, and was available in the states, I would have been all over it about a month ago. But I have sincemade other purchases and now have no need for it. It looks like a great unit and many KJs that also DJ will find that unit to be perfect for their setups.

If I remember right, I do recall seeing a Samson powered mixer that had a crossfader too. I don't recall the model number or power specs though.
 
Thunder that IS a very good deal. Do you happen to know what it puts out at 8 ohms? Will it run at 2 ohms?

I've been lusting after the Samson PG3800 because it puts out so much power for so little money.

But that Peavey is tempting and I bet a lot smaller and lighter than the Samson.
 
Not recommended for a 2 ohm load (but it handles it fine if need be... from personal experience) 350 watts @ 8 ohms. The one I bought new was $1120 for the purchase, it is now just under 10 years old and still pumping without a single problem!

Yes this is an excellent deal!

Although it is a single rack space unit, the fan is located on the bottom of the amp so you need to leave 1/2 rack space open beneath it for cooling!