Need Lots o' Help...

To many ads? Support ODJT and see no ads!

DJDancer

New DJ
Dec 19, 2006
149
0
76
Orange County, NY
Hi Everybody,

Being completely new at DJing and totally at a loss as to gear, I look to you all for guidance. I had a chat with Bounce the other day and he suggested I purchase an equalizer. I have a very basic setup...nothing fancy...but it does work for me. Behringer EP2500 amp, Numark CM200USB Mixer, 2 Peavey PR12s, American DJ dual cd/mp3 player and Samson Airline Wireless Headset & Handheld mics. What brand of eq would you guys/gals suggest??? The more I look at all the different brands and all those buttons...the confused-er I get!!!

Also, I may also be in the market for a subwoofer...Peavey makes one in the same line as the speakers I already have. The specs say that it can be daisy-chained. Would it be possible to have the amp I now have power the sub also??? Or do I need to get a separate amp? If so, how do I hook up the second amp...

Oh my goodness...so many questions, so many questions...

Sorry...any help would be greatly appreciated and as you can see, BADLY NEEDED.

Thanks to all...:sqbiggrin:
Bern
 
It is always best to run a second amp... I don't know the amp you are using so I don't know about if there is enough power..

I like keeping all my speakers the same not mix and matching...

But before you upgrade to a sub woofer, you have to decide if those Peaveys will be your main speakers for awhile..

If you are thinking of upgrading, you might want to buy that sub woofer then when you buy new mains, you'll already have the matching sub woofer...

It depends on what type of gigs that you are doing now, but it also depends on what type of gigs you see yourself doing a year from now...

I know, just more fuel for the thinking fire...

More gear guys will chime in ....
 
oh boy... well... I'll try not to get carried away. Chuck has hit serveral issues squarely on the head... so I'll leave them alone.

As far as EQs... you'll NEVER be sorry owning a dbx. Solid, reliable, and not much more expensive than the "cheap" ones. Much better sound quality too.

However, if you're going to add a sub, you'll probably want a crossover too, since ideally, as Chuck said you'll bi-amp the system.

Now... if you want a great piece of gear that "does it all", look at the DriveRack PA. It has dual 28 band EQs, parametric EQs, Crossover... plus lots of other goodies that are highly useful. Some highlights would be feedback elimination, compressor, limiters and a delay if your sub is not near your tops. Best of all are all the user programmable presets that would allow you to easily program your system for different venues and/or full range vs. biamp shows that you may run. Your best bet if you're considering this piece of gear is to call us up toll free at 1-888-660-6696, and get Jim at extension 18. He will talk to you for HOURS about this piece of gear. He personally owns 2. LOL.

Ben
 
Carvin offers a very nice balanced dual 2/3 octave, 2U EQ for $170.00. It's the EQ2015. The sweepable high and low cut filters are great for managing your audible tone and tweaking out rumble. We've been working with this unit for several years now and have been quite satisfied with it. :)

System equalization is primarily utilized to match your system to your speaker systems. Every speaker has different characteristics. Especially useful is the EQ's ability to tweak out mic feedback.

If your mixer has a summed sub out jack you may not need an active crossover. You will need a separate amp or additional amp channel to drive the sub cabs, though.

Daisy-chaining simply means that you may connect two cabinets in parallel. Run the output cable to one cabinet and connect the two cabs together via another cable. Steve Miller can probably tell you more about the Peavey cabinets and how to set 'em up properly.

While I am a firm believer in compressor/limiters in professional sound systems, you may not need one right away. C/Ls can shape and tone your sound while reducing mic ringing when set up properly. These units tend to shine most when mics are used. They may also be set to place a "ceiling" on your output ~ very useful in venues where noise restrictions are present.

A bit long winded but I hope it helps.
 
OK, I am some what opinionated.

First off the PR series from Peavey is as far from being "Peavey" as you can get. While they will get you by in a pinch you will be looking for other speakers fairly quickly. But all that is reflected in the price. I got a pair to test drive and it was less than a week before I had reworked the crossover gutted the cabinets and installed BW drivers and replaced the horn drivers with XT22's.

I am not dissing your choice just warning you. The old saying of "you get what you pay for" applies here.

The Behringer amp you have is more than enough power for the PR cabinets, so you won't have to be concerned there.

Subs...... Get a decent wood cabinet sub not a plastic unit there is truly a world of difference in the sound and performance.

Daisy chaining speakers, speaker cable into a cabinet and speaker cable out of cabinet to next cabinet. I do not recommend doing this for a couple of reasons. which double when using 1/4" phone plugs as the carrier.

1. 1/4" plugs have a tendency to arc when running a high output amp. when you daisy chain two 8 ohm cabinets you are running double the power through the first cable (and the 1/4" plug and connector).

2. by daisy chaining you are running whatever length of cable to the first cabinet and then adding that much more to go to the second cabinet. So let's say you have two 20 foot cables, the power to the first cabinet is running 20 foot of cable and that twenty foot has a given amount of loss and has a certain amount of affect on the damping. The second cabinet has the same losses from the first 20 feet of cable, plus the connectors plus 20 more feet. affecting power loss and damping even more for the second unit.

Using a single amp to power both mains and subs means you will be running mono (and there certainly isn't anything wrong with that, some of us prefer to run mono). You will need a crossover of some type, many DJ grade amps have a crossover built in to cross at 150 hertz (a little high for me I prefer 90 Hertz cross for the subs, and 1500 for the highs but high cross is not an issue for the PRs as they do not have provisions for mid high external cross)

EQs most DJ's tend to do the smiley face on an EQ which totally slaughters the sound. Most don't understand what an EQ is for. For your use you probably will be better off without one and just EQ from the board. You will have a lot better sound without it if you aren't familar with it's use.


Now that I have told you all the bad! ;>) let me tell you what I would do if I were limited with what I could spend and what I knew.

Sub Yes get a sub, do not get the PR series unit, instead save a little longer and if you are going to go with Peavey (by the way the next line up is very good gear) get the SP line it is fairly cheap but uses the BW drivers and can handle power.

You will want an amp that can get something out of that driver so I would go with an amp capable of at least 800 watts (1200 prefered) at 8 ohms. This will mean either buying an exceptionally expensive amp producing that much power per side or buying an amp capable of that output bridged. The Peavey CS 800 will give you 800 watts at 8 ohms and you will still be using it when you retire.

For processing/EQ I would look at the Peavey Komos fairly simple to operate works well with the sub but apply all setting with caution. The drive racks would be great but major overkill for what you are doing and is going to require a keen understanding of what it does and how to use it.

As you begin to make money put aside some each gig for speaker replacement if you are staying with Peavey look at the Impulse 1012 or 1015 still plastic still fairly light but a world of difference in performance.

Welcome to the wonderful world of sound reproduction, DJ style!
 
Hi guys,

Thanks for the input...decisions, decisions...!

Just a little background info...Although I have had some "real" gigs, the lion's share of my work is done on a volunteer basis for a local War Veterans organization. I run line dance classes a couple times a week, all the proceeds of which go directly to the Vets and also DJ whatever dinner-dance events they have. at no charge. Needless to say, my income from this is approximately zilch...so I am trying to keep costs down as much as I can, while still providing half-way decent sound.

So at this time, my Peavey speakers are going to have to do me for a while. I will definitely take into consideration the advice you've all given me...I learn a little more every day...even tho' I still live in a state of confusion! LOL!!!

Thank you so much...you guys are great!

Bernadette