Lights at weddings

To many ads? Support ODJT and see no ads!

DJMC

DJ
Oct 19, 2006
2,875
7
72
Northern California
I'm using lights more & more for wedding receptions, conversely I'm eating less & less.:sqwink:

Most recently, it was at my December 30th evening wedding....I packed the lights into the van on Friday, knowing they would be needed for Sunday (NYE).

At first, the bride didn't want the free lights, even though the groom, groomsmen, and MOH wanted them real bad. They were able to talk her into it.....using my logic that it was the "night before NYE" and we need to use all the available ammo to keep the crowd dancing and not going home to rest for next eve....

Sure enuf, the lights turned out to be awesome (but sorta puny for the size of the large hotel ballroom). Easy to set up, it just uses two small tripods, and the DMX fixtures were master-slave configuration (each pair of Alpha-moons & Verti-PROs is synchronized to run identical patterns), sound activated, with a simple set of power strips to activate (easier to set up than the DMX controller). The "Cluster" (centerpiece) sits on the table, but I'm sure there are better ways to mount it for maximum effect. Previously, entire setup of the lites was only 10 minutes up and 10 minutes down.

Now that I'm adding the "intels" to the mix (two Chauvet Mini-Legends with EZ Controller), I'm wondering if the "ease of setup" aspect is a thing of the past. These units weigh 26.5 pounds each, which is more than double what my current fixtures weigh.

Overhead trusses, at first glance, aren't appealing because I don't wanna make the wedding reception look like a HS dance. Then again, maybe there is a truss that looks "elegant" without being gaudy.

Another option is to use my passive speakers in a large ballroom, haul in the extra amp case, and then use the Intels on top of the speakers. Chances are, if the client wants lights its gonna be a big venue with a huge ceiling.

I may retire the 4-year-old DMX fixtures. they still look and work great, but in smaller venues, the Intels would handle the entire light show. Then again, in a big room those extra tripods of lites would make my setup look more impressive, with the Mini-Legends on top of the speakers on each side (they look like something out of a Star Wars or Robo Cop movie), with the other two tripods behind me, holding the other 4 fixtures, in the middle. Who knows, I may break out the DMX lighting controller to operate all six pieces. But I'm lazy so its EZ controller (and power strips) for now.

Apologies for the duplicate thread, but I'm sure that not everyone reads the "Light Shack" board, so maybe some of you wedding DJs can chime in on what they do at weddings when they run lites.
 
This is what I typically use at weddings.
LIGHTS.jpg


Same setup, nicer venue ;) in the dark
Picture023-1.jpg
 
My best advice for weddings(or any event)when it comes to this: it isn't quantity of lights. It's the type of lights and what you do with them.

That's a nice setup JFactor1! I like that a lot! Looks great!

I'll post up a picture of my light show(forgive the wires and not having everything turned on at once), here's what I have:

2 Baby Stars(slow rotating)
1 Martin Raptor
4 Martin SCX500 Scanners (I use a CP10 to control them and lots of programs on it!)

I have other lights I can bring with me(vertigos, baby stars, par cans, and a couple American DJ scanners I got years ago I never use), but this light show does it all for me at any event. I may add an 8" mirror ball for the scanners to bounce off of in the future, but for now I think that's good enuff.

Just find what works for you. You don't have to light up the whole room...just the dancefloor. :)

Cripes...I feel like I'm showing off...
 

Attachments

  • P1010001.jpg
    P1010001.jpg
    89.3 KB · Views: 3
JFactor1 : That is one of the cleanest lighting arrays I've seen. Although not offering lights personally, yours would be a design that would be copied should that need come to pass.
 
I have been trying to through in lights for free for my events and they seem to like them. Both the weddings I have in the next couple of months both wanted them. I'm using 2 Martin EFX 600's and a couple of other lights. Now those boys are heavy. I think each weights in at almost 40 lbs. That will make you sweat. :sqlaugh: And Jfactor1 your setup dose look sweet. I have lately been using a duratruss with a mirror ball in the middle and the 600's one at each end. It looks clean and simple. But very effective.

http://www.youtube.com/watch?v=WynU_VrgZ-w
 
I really like the idea of moving heads on vertical truss towers.

Think about this. A 5 foot 12 or 14 inch square tuss on a base plate, truss warmer LED par can in the base pointing directly up. Wrap the truss in thin white fabric and mount the moving head on top.

Very elegant, simple and will add a LOT of energy to the floor with out a lot of setup work.
 
I always use my lights at weddings. I recently bought some trussing which has cut my set-up & tear-down time by over 30 min. each.

The below picture is of my set-up at an outdoor school dance, but I use the same set-up at weddings. Each tower has 2 Martin Acrobats, one Martin MX4, and an LED wash. They are 10 ft tall when fully assembled and I place a sub on top of each base plate for stability.
 

Attachments

  • Outdoor Dance.JPG
    Outdoor Dance.JPG
    51 KB · Views: 14
DJBob: Nice set-up! :thumbsup:

What brand of trussing is that?

Thanks,

Kirby
 
A local DJ in my area invented them and began marketing them this year. I tease him by saying I have SN #0001. They are all all aluminum and the fixtures stay mounted inside the truss so they remain protected. The front of the top section of trussing is open. The top section is 6 ft, middle section is 2 1/2 ft and the bottom section is 18 inches, and can be assembled in any combination of sections to accomodate varying ceiling heights.

www.djlightingsystems.com

They will have a booth at MBLV expo hall.
 
A local DJ in my area invented them and began marketing them this year. I tease him by saying I have SN #0001. They are all all aluminum and the fixtures stay mounted inside the truss so they remain protected. The front of the top section of trussing is open. The top section is 6 ft, middle section is 2 1/2 ft and the bottom section is 18 inches, and can be assembled in any combination of sections to accomodate varying ceiling heights.

www.djlightingsystems.com

They will have a booth at MBLV expo hall.

Sweet! Pretty creative set-up....

A bit out of my price league.....so far! :sqwink:

Thanks for shaing the link and information! :thumbsup:

Kirby
 
Bob...

I'm looking forward to seeing these. I may be interested... or at least willing to do a product review. Let them know Tyrone will be stopping by or have them contact me.
 
Tyronne- be sure to stop by and see them at MBLV- the trusses are available either loaded with lights or empty so you can install your lights (which is what I did). A full set was sent to Mobile Beat Magazine for a product review (which is supposed to be in the issue that isn't out yet)

Matt- I sold the mini-legends last year. You going to MBLV?