Big Hotels and Sh!tty Load-ins...

To many ads? Support ODJT and see no ads!

maestro

Mac Daddy DJ
Aug 30, 2006
3,694
1,388
61
British Columbia
www.musicmaestrodj.com
How do you guys do it, with the HUGE set ups? Last night I had another Grad dinner dance at a big Vancouver hotel, the Renaissance Vancouver (Waterfront), Jon Tuck is familiar with it... After waiting for the security guard to open the gate to the loading bay area, I got to unload. At least this place had a little hydraulic ramp for my to push my cart onto and then raise it up to the higher loading dock level. From there, I had to bang on the door to get buzzed in again. After that, through the plastic flappy things down a short hall and into a service elevator with doors that close in about 5 seconds! Then up to the second floor, straight out for 10 feet, then make a left in front of the kitchen sinks where of course there was not enough room to pass, another left, then straight, not enough room to get by (again) so I had to move hotel's sh!t out of the way. All the way to the end, then right, then straight and then another right into the ballroom! Unload and then head down to do it all over again! I don't even want to talk about the end of the night with all the crap that was piled in the hallways... It'll just make me mad! :sqmad:

This is one of the easier load-ins with our downtown hotels. Most have high loading bays for large trucks and no ramp for us regular van guys and our carts / dollys which totally sucks! I have been known to park in the hotels underground and sneak stuff into the guest elevator and up to the ballroom. Sometimes it's worth the $30.00 in parking... The problem is that you can't access the elevators later in the night from the parking garage to return for your second load which is why I have a second cart now. I bought an expandable cart for my second but now realize that in order to make the turns going through hotel kitchens and halls, you can't really have the cart set longer than my old one at 3 feet anyhow... :sqconfused:

How do you guys with these massive set-ups do it? I am just bringing two tops, two subs, two Acrobats and maybe two color-changers but by the time you add all the light / speaker stands, console, cables, etc... you have a sh!tload of gear to move. Your thoughts? :rofl:
 
My dad and I had this problem at one particular place in downtown Boston. We had to load through the back door, which was down a tight alleyway and around some poles. There was barely enough room to get the minivan in ('92 Dodge Caravan). Come to think of it, I think my dad scraped the side of the van on one of the poles. Anyway, it was a total pain in the butt, so Dad decided that he would never take a gig there again. It was a boring night anyway, and the waitstaff were stuffy. The clients (anniversary party, I think) wanted quiet piano music for dinner and there wasn't much time left for dancing.

Anyway, that's the solution: don't take anymore gigs at that venue. I don't know how feasible that is around Vancouver, but there are plenty of good venues outside of downtown Boston.
 
Closest route to the ballrooms are usually the front doors, I always choose the shortest route.

While many times the managers or bell caps will tell you that you can't unload up front I pretend I can't understand the language and continue to set the gear out on the front walk. All but one time the hotel people have quickly helped me to carry my gear to the ballroom. the one called the police to have me load it back up and carry it to the service entrance, it took me damn near an hour to get everything back in the van just right, the hotel manager was making a scene the police were laughing their arses off. I went around back to the loading dock and unloaded everything into the hallway at once and then proceeded to carry it slowly to the ballroom mean while another service came to unload and couldn't move untill I got everything out of the way.

The hotel had me load out through the front at the end of the night!
 
There are a couple of venues like that that I have worked and setup a large sound and lighting package. First time there it bit me bad, barely was able to get setup no time for testing or troubleshooting Now if I get a call to be at that venue I allow an extra hour more setup time and add more to the quote to cover it. I hate the venues that only have large truck docks, and will not allow a DJ to unload anywhere else. Had a job at a venue out of town that I had never been to and I was using a pair of Mackie 1232s (132lbs each) and a pair of Mackie Fussion subs (165lbs for the powered cabinet and 100lbs for the slave cabinet). This place only had the semi loading dock, no ramp, and a long journey through the kitchen to the hall. Now I can handle these large speakers okay alone with the crank lift I have but it would not lift high enough to get them on the dock. Right outside the hall was a nice entrance with double doors, about 25 ft from where I was to setup, but I was told I could not unload there. I was several hours early no one but kitchen and venue staff was there yet. I finally got a couple of the kitchen staff to help me raise the speakers up and gave them some cash. I was also harassed about not wearing a coat and tie while loading in. This was August and it was about 100 degrees outside, and again no guests were even there yet. This venue is now on my list, of venues that I will add a large extra fee if and I mean IF I ever do a job there again. The extra fee would have to cover a roadie (well dressed one), and double change of clothes for me if it is hot outside.
 
This is one of the most beautiful locations in Toronto.

http://www.oldmilltoronto.com/FloorPlans.html

From Dj point of view – one of the worst. It only took me one wedding to start adding 200.00 for that location. I was on the third floor with no elevator available (small wedding) and hardly any AC (last summer was hot!)
Now I will hire helper.

My second approach is to make my setup lighter (splitting into smaller pieces).
I'm also trying to get away from subs.
 
The Delta Beau here in town is a difficult load in/out as well. Back loading dock...no ramp ... 5 feet high....10 mile hike to room. At 1 a.m. it took 20 minutes to find someone to unlock the sliding door.....
Next event it's front door or go home....
 
Anzyxx, you could try using extra top cabs for subs, I do that when the need arises. I'll set a pair of FBT MaxX 4a's up on stands and another pair on the floor in front of me in place of subs, I can even dial back the mids and highs on the built-in 3-band EQ. The sound with the four cab's is awesome! I even did a few middle school dances this way before I had subs and it rocked!

Steve, the load in bites!
 
Once again take control.

One of the first things you do before you accept or sign off on a gig is to go and visit the premises and the loading area. Ask questions like "Is the loading area accessible on weekends?" Will my vehicle be towed if left unattended?" "Can you show me where I will have to pass through to get from the loading area to the setup area?".
Remember you are there on behalf of your client to supply their needs. Let the client deal with the venue. The venue does not care about you but they sure as hell care about their client.
Make sure elements like this that may hamper or delay you are included in your "Ahem" contract. (You guys seem to want to put everything else in the world in those contracts, why not this?).
Lastly take charge. BE IN CONTROL. Don't argue with the venue staff, instead let them know that by delaying you, they are helping to breach the contract with the client. They may cause you to fall behind schedule.
The way I used to handle it was when I got to the venue, I will first go in to make sure that my pathway was unobstructed. I will ask for the person in charge and let them know that I needed a clear pathway so that neither I nor the venue will cause a liability (Believe me they understand that kind of lingo)
Now the elevator doors are an animal of a different nature. I had had them take off (without me) with my gear in it. Fortunately I never lost anything.
Remember, you are a professional. BE IN CONTROL!
 
If you want completely light weight for mains and subs here is a real suggestion that will work for anyone. Peavey (I know I know but hear me out) Impulse 100's for the mains and Peavey Impulse 200 subs, driven with a pair of DPC 1400's complete sound system on one hand cart trip with a weight of 140 pounds total
 
Thunder, a pair of my FBT MaxX 4a's on stands and another pair on the floor acting as subs, rock the house! At 35 pounds each and with 400 watts RMS built in, they are hard to beat. They even have a 3-band EQ built-in so I can dial back the mids and highs if needed. That's 1600 watts and only 140 pounds! I have even rocked middle schools with this set-up before I had subs.
 
Arrrrrggghhhh! Almost every hotel in downtown San Francisco - service dock covered in cooking oil, slippery ramps, up an elevator, through a kitchen, down another elevator through another kitchen and so on 'til you get totally lost and have to leave your rig unattended and go to reception only to find out that if you slipped the bellman $20 he would have helped you in through the front door.....

I learned pretty fast that it was a grand idea to get on with the bellman when he went off shift he would pass on the message - help the DJ for a cool tip.

Worst load in for me ever 7 speakers, boatloads of lights etc etc The Ritz Carlton on Nob Hill..........
 
Then what the heck are you complaining about! :sqlaugh:

Oh Yeah! 2800 watts with the Peavey's
 
Thats why I like church/community halls most of them have a door leading to the stage :sqwink:
 
2800 watts but the FBT's smoke the Impulse series; I know as I used to run the Impulse 500's before switching to the FBT's. Oh and a pair of them running Hip Hop in full range on a wedding dance floor only registers a power draw of 1.3 amps with no subs, very efficient!

If I had to do that one over again, I would have brought the four FBT's and spread them out to cover the entire room better and then moved two on the floor to act as subs... If only I could go back in time!
 
Oh I agree with you, the FTB's will out run the Impulse with an equal amount of power. They are a better class and more efficient unit.
 
The Queen Mary is by far the worst set up I have ever heard of. One service entrance, with a service elevator from the 1930s. It breaks down constantly. Then you have to go down a very long, narrow hall to a very small elevator (used to take me two trips before the Bose), and up to the deck you work on. The top deck can be reached only by taking the elevator to the second to top deck and going up a large flight of stairs to get in.

One of the major issues is that there are regularly five or more (often quite a few more) parties, so you have many DJs and a few bands all competing for the elevators, both before and after the events.

I always charge extra, and give myself an extra two hours for load up.

The Del Coronado Hotel in San Diego makes it hard due to their policy of not loading/unloading in the front, also.
 
Thanks Mike but that's not for me...

My dream is to be able two fully loaded carts onto my van without unloading them to do so. I guess I'll have to look into an electric ramp for the side door of my Astro van, not sure if it would be long enough though; I'll have to research it.