I do repairs on both shure and sennheiser mics.. While I personally prefer the sennheiser for Both DJ and karaoke, I do own a couple PGX and ULX systems.
The sennheisers are by far the more drop resistent of the two.. the Evolution series features a cast body that cannot break, and a superior shock mount system. The balls on the mic are squared, and rigid, so they don't dent like an SM-58. put it down on the table too hard, and you squish a nice dent into your ball.
The only parts I've ever seen actually break on a sennheiser are the LCD, and the battery door portion of the body. 99 percent of the time, I don't actually have to fix the mic. What happens is there is a small RF shield inside the end of the mic which loves to pop off when knocked hard. this dislodges and shorts out the mic board.. Not permanently, just temporarily... I take it apart, snap it back on, hot glue it, and it never happens again. I've also never had a single peep out of my sennheisers outside of leaving the practical range of the reciever. I've never changed the frequency of my mics in 4 years.
They are truly indestructable, and all parts are replaceable by the novice.
Shure Mics seem to split like a stuck pig when dropped... the newer PGX models are too easy to over tighten the battery door, and most people do... when it hits the floor, it explodes... I go through these battery doors at a rate of about 20 a month. most people buy a couple extras.
I'm not a big fan of the SM-58 period... it's the standard workhorse mic, but you'll rarely see performers who value vocal clarity using them. (country artists, vocalists, hosts, awards shows, etc...) rappers and rockers still love the old 58.
however, either way, an agile system with a pilot signal will be fine.
I did some home research with an HP spectrum analyzer, and signal generator, with an analog and digital sweep frequency from 600 mhz to 880 mhz. My Sennheiser mics were impervious to digital signal burst while the pilot signal was active.
Unfortunately, those who want a reliable wireless in a digital TV heavy market are going to have to buy a more expensive mic, but also buy the proper band for their market.
Most like shure and sennheiser have different bands they recommend for different regions. A or B here in Atlanta won't work well.. C is free and clear for the most part.
Call the mic manufacturer, tell them where you live and they'll recommend the proper band.. G.C. usually doesn't know this, and will sell you whatever...
magazines and those who want to sell you more mics are playing up the hype, but the manufacturers say that the quality mics should be OK..