Can I make my own Speaker?

To many ads? Support ODJT and see no ads!

LoudspeakerDJ

New DJ
Nov 16, 2006
116
0
48
Well, I like to build things, and since I need another 18 inch sub, maybe that will be my next project.

I currently have a pair of 118v yamaha subs, and would like some more. I can easily measure all the specs, and build a cabinet that is exactly the same. (I have a large wood working shop, so this sort of thing is easy for me to produce) I would then get it sprayed at the bed liner place! Appearane of my gear is important to me, so I wouldn;t even consider this, if i didn't think my home-made ones would look exactly the same.

My problem is this, where do I buy the speaker, and the appropriate parts such as 2 large handles that are on the side, speakon connectors for the back, and there is I think some type of small circuit board or crossover isnide that I would need as well. Does anybody kow where I Could find this stuff.

Question 2....
Will I save anything when I do this? I'm kindof thinking that after the purchase of the spraying, and the components, I might not save much.

Thanks alot.
 
As to whether or not you would actually save money, I think that would partly depend on whether or not you place a value on the time it'll take to design and build the unit(s).

As for parts, you'll be hard pressed to find the same handles and input plates as your Yamaha subs, as the manufacturers are not really into selling the parts for their cabinets for DIYers. However, there are companies like Penn Fabricaction (www.penn-elcom.com) that sell parts for cabinet building.

As for the spray coating, you can also buy kits that you can do yourself for less than having a box liner company do it for you.

I think that you'd also be surprised at how little markup there is on gear, people seem to assume that there is a huge markup on this type of equipment, but in reality, it's less than than 20% in most cases. I think once you do the math and look at ALL the costs, the only thing you gain by building the cabinets yourself is the personal satifaction...and a few slivers!
 
As to whether or not you would actually save money, I think that would partly depend on whether or not you place a value on the time it'll take to design and build the unit(s).

As for parts, you'll be hard pressed to find the same handles and input plates as your Yamaha subs, as the manufacturers are not really into selling the parts for their cabinets for DIYers. However, there are companies like Penn Fabricaction (www.penn-elcom.com) that sell parts for cabinet building.

As for the spray coating, you can also buy kits that you can do yourself for less than having a box liner company do it for you.

I think that you'd also be surprised at how little markup there is on gear, people seem to assume that there is a huge markup on this type of equipment, but in reality, it's less than than 20% in most cases. I think once you do the math and look at ALL the costs, the only thing you gain by building the cabinets yourself is the personal satifaction...and a few slivers!

I agree. Also you won't have a warranty to fall back on. S118 cabs are great subs at a very reasonable price. I would just buy another one.
 
Where are the spray on coatings purchased at? I've never seen them before.

Any auto parts store sells them. Be warned, they're not exactly cheap either.



If you really want to build your own sub cabinet, the Eminence Lab 12" sub is immensley popular for the do it yourselfer. With very little research you can find plans online. Supposedly, when powered right (read alot), it will out perform 4 typical 18" subs. (I can't verify that statement, but I've read it everywhere)
 
Make sure you know the specs for the box before you build it or you wont get the response you want. If you plan on doing this thee is a program called Bass Box. If you pump in the specs of the driver it will tell you the size of the box you need and the design. I toyed with it a long time ago I dont really recall it that well

Heres a link for it http://www.ht-audio.com/