Can You Do This With A Bose PAS?

To many ads? Support ODJT and see no ads!

HiDefDJ

New DJ
Aug 13, 2006
2,150
0
47
If you have a vertical box or triangle truss is it possible to slide the PAS stick in the truss? This way it's REALLY out of view from the guests. If so, how cool would it be to have a stick on either side of you in the vertical truss and then 2 going horizontal above your head.

That would be cool.
 
The idea for the horizontal in the cross beam portion of trussing had been bounced around some time back. The first thing to envison is the 160 degree wedge, then realize that wedge is 7 feet tall with very little down-throw and up-throw from the source.

equipment-bose-cy.jpg




Now, turn that wedge 90 degrees to plant that wedge sideways in the horizontal trussing sections.



One has now since totally and effectively un-did everything the L-1's were designed to do.
 
OK, but what about putting them in vertical box trussing. Would that work?

Of course.

Issue being the PS-1s (powerstands) and the footprint they maintain.

I understand you are asking for the L1's to be inside the box truss. One would either need to modify the base of the trussing to "float" the truss sides over the PS-1's.

Or...

Forfeit the warranties by removing the wiring harness socket inside the PS-1.

These are the closest I've come to acquiring what you are looking for in "the hidden" effect:
L1tight.jpg

and
TrussPASsm1.jpg


In both cases, it's the ability of the tripod legs to span over the PowerStands.
 
Thanks Ken. I don't have either the Bose or box trussing. I just happened to be thinking about the situation and this popped in my head and I thought it might be a good idea if possible.
 
i'll post this here. i was going to start a new thread, but we all know how bose threads can go all over the place, so instead of starting a new one, I'll do it hear.
I did a show 12-16-06 at Jacob's field. A mulitilevel facility overlooking the field called the terrace club...about 250-300 people. Company Christmas party. cocktails upstairs and dinner and dancing below.
for cocktails put one system upstairs. Then moved it downstairs and put it on the far end. used the wireless setup...The venue said it looked like the perfect system for their place. both floors are kind of long and narrow since it they both overlook the baseball diamond. They said most DJ's have the problem were the music is way too loud by the dance floor and too low by the bar.
They were raving about the system before they even heard it. Afterwards, they said they would suggest use to all future customers.

My standard bose disclaimer:
I am not trying to suggest that people that use bose stuff are better than anyone else...nor am i suggesting that a terrible DJ would do fine with this system...nor am i suggesting that people that don't use bose stuff could not achieve success in the above situation. I'm merely relaying success i've had with some of my equipment.
 
I would think in the situation with a stick inside of a vertical box truss that some of the speaker aiming will be affected.

Scott, the same thing could have been acomplished by any DJ who wanted to put a a third speaker by in the other section of the room, it isn't that difficult to do wired or wireless either a conventional or the Bose system would have done the same thing, it just takes a little forethought.
 
steve,
i totally agree.(as posted in my disclaimer above......."nor am i suggesting that people that don't use bose stuff could not achieve success in the above situation") But they were raving about the system and how it looked even before i turned it on.
I was not about to say,,,,,,well you know....anybody else could have put a wireless powered speaker on the other end of the room.
Again, when the venue says that system is perfect for our place...who am i to argue? They loved how they looked, sounded, and how portable they were. They specifically said they have never seen a system like that.
In my clients eye's, it HELPED me be unique. That's something i'm gonna take advantage of every chance i can.

ps
i bolded "helped" because I still needed to unique also, but the system assisted me in doing that.
 
YourBasicDJ : The L1 system, being a cohesive matched system, wasn't designed for such an application.

There is a similar looking product though completely different in properties and configuration applications (the MA12), and is used almost exclusively for permanent installations.

Here's some information to view.
http://pro.bose.com/ProController?e...rl=/pro/products/panaray/panarayma12.jsp&ck=0

Again, although cosmetically alike, it is acoustically different.
 
Scott - you forgot " Bose does not get you bookings" LOL


Steve,
thanks for reminding me. I need to remind my customers that they are not allowed to book me or even remember me just because of the bose system. I'm starting to get tired of my equipment getting some of the attention that should be GOING TO ME!