Can I have the wav files auto delete after converting to mp3?

To many ads? Support ODJT and see no ads!

Kevin Kelly

New DJ
Aug 31, 2006
1,019
0
65
After reading post after post, I've gone the way many of you have in ripping several cds to wav files first then doing the converting overnight while I'm sleeping. As you know, you can only convert so many to mp3 at one time...the next day, I've found myself having to go through each wav song and seeing if it's been copied as mp3 yet. Depending on how many it will let me start converting the night before, I can't always convert a full album of, say Martina McBride so I have to go through the mp3 folder and make sure all of them got converted before I start deleting the wav files.

Whew....I hope that makes sense. My question is...is there a setting in Audiograbber that I can check that will automatically delete the wav file after converting to mp3? That way the next day, I don't have to spend all the time manually deleting and hoping I don't accidently delete a wav file that hasn't been converted yet.

I know there is a setting where it will rip the cd straight to mp3 and THEN delete the wav file but I would prefer to rip to wave first, then manually choose the ones I want (or the number it will let me) to convert overnight.
 
Not sure about Audiograbber, but with EAC, it automatically deletes the .wav after conversion.
 
If I rip directly to mp3, then yes, I can avoid the whole wav part of it. I read post after post from guys that said it's better to rip to wav first (and even better to keep those files so you'll never have to rip to the cd again) then convert to mp3. I can't imagine keeping every wav file on a hard drive somewhere. I just don't have the room....

Am I affecting the quality if I rip to mp3 directly?
 
If I rip directly to mp3, then yes, I can avoid the whole wav part of it. I read post after post from guys that said it's better to rip to wav first (and even better to keep those files so you'll never have to rip to the cd again) then convert to mp3. I can't imagine keeping every wav file on a hard drive somewhere. I just don't have the room....

Am I affecting the quality if I rip to mp3 directly?


OK.... just rip to the highest setting for MP3. I use 320. If you rip from a wav. file you still have an MP3 at the end of the day. So, it seems, your only issue really is storage..... which I guess I would buy a 300 GIG HD.... cheap enough.
 
True... a high bitrate MP3 will do for most DJ purposes. The majority of your guests won't notice the difference anyhow.
 
OK.... just rip to the highest setting for MP3. I use 320. If you rip from a wav. file you still have an MP3 at the end of the day. So, it seems, your only issue really is storage..... which I guess I would buy a 300 GIG HD.... cheap enough.

Papa...and you ARE a papa! Ha...

I've been ripping from cd to wav at 192. If I rip from cd directly to mp3 at 192 will that be the same quality as the cd to wav at 192?
 
Papa...and you ARE a papa! Ha...

I've been ripping from cd to wav at 192. If I rip from cd directly to mp3 at 192 will that be the same quality as the cd to wav at 192?[/QUOTE]



Ya know, I don't know.
But I always rip at the max choice available. MP3 is fine almost all the time, however, when played at high volumes, IMO, lower bitrate conversions "fall apart" to some degree, IMO.

I am not a techie or specs guy.
I listen, I use, I try....... I do what works and sounds good or functions well for me.
 
They say I have to say something here. Hi folks, see below.
 
Wav to the crowd & 192 good enuff?

You may find someone with golden ears that can hear the difference (as opposed to someone that thinks they can hear the difference). In double blind tests the number of persons that can discern a qualitative difference in files at greater than 192kbs shrinks to insignificance. Remember this is in a controlled setting without extraneous noise and excellent equipment, certainly not the type of environment we operate in and the typical customer listens in. I too have been using 192kbs. 320kbs will not hurt a thing, no harm no foul except for the extra space. With the way hard drives have been going, .WAV storage is possible, much less the 320kbs MP3. If it makes you feel better DO IT but it taint necessary.

Let’s face it, if you can’t hear the difference - what’s the diff? Set up a couple (or several) of files with different bit rates. Listen to them yourself. Use your headphones. Try ‘em on friends and maybe a friendly customer. See if anyone can really hear the difference. AND KEEP YOUR POKER FACE ON SO AT LEAST IT IS A ONE WAY BLIND TEST.

BTW: Going to MP3 @ 192 should be better quality than going to WAV @ 192 because you are reducing the sampling rate in the .WAV which is directly related to frequency response. Nyquist’s theory, in short, you need to sample at double the frequency you wish to reproduce. The Mp3 is a different case because the sample is encoded and played back via an algorithm. The algorithm uses psycho acoustic traits to drop information that is unecessary (can’t be heard anyway). That is why it is referred to as a lossy codec. Go through generations of successive compression and decompression (that is have a Wav compress it to a MP3, take that MP3 and make a .WAV compress that into a .MP3 etc) and the reduction in quality will be significant after two or three generations. Some say the second generation, some wags say the first generation sucks. A .WAV is a .WAV is a .WAV and there is no loss (unless you decrease the sample rate) but it is BIG. Picks yer poison.

Double blind is the acid test but is rarely carried out.

Hope it helps and didn’t confuse the issue.
 
I realize this thread is a little old now, but I'll reply just for the sake of others with the same question.

Computerdjsoftware dot com says this about ripping:

"Why rip to WAV first?



If you use a little forethought, you will understand the added benefits of ripping to WAV first, which are; it's much faster to rip to WAV, then to rip and encode at the same time; you can then encode the WAV's to any format you like later. A good practice to follow if you can, is to rip to WAV, convert to MP3, burn the WAV's to CD or DVD, then delete the WAVs off your computer. You then have them available later if you wish to convert them to a different format, without having to re-rip them. The added benefit is less wear and tear on your original audio CD as well."


They also say:

"The minimum MP3 encoding quality for DJ work is 160kbps. You can go higher if your space permits, but remember your noise floor at a DJ event - it's high, so, much of that extra sound quality is lost due to the ambient noise level at the event. If you have plenty of disk space (and the facilities to back it up), you might just as well go for the 320kbps encoding rate, as it is nearly indistinguishable from the original CD to the average ear."

Anyway, Audiograbber does indeed have a setting to delete the .wavs automatically. If you click on "Settings", and then "MP3 Settings", you will see at the top where it says "Grab to". Put a mark in the spot that says "MP3 file via intermediate wav file. Delete the wav file". This will rip to a .wav, convert to a .mp3, and then delete the .wav file.
 
my min standard is 192kbps sorry had to add that if you really want to use lower then go buy a Cassette deck and use that instead