New Bubble System + Truss + Pics

To many ads? Support ODJT and see no ads!

Djcarolina

New DJ
Nov 5, 2006
755
0
36
Aloha all. Keeping in my recent tradition of buying something new every week, i went nuts this weekend and bought an entire bubble system for use at school shows, weddings and my new venture into bubble parties. I also picked up a 2nd truss last week and finally put it up and checked it out! \

Heres whats in the bubble system:

4- American DJ Bubble Machines
4- ADAM Utility Stands
4- Generic Clip On Fans (used outdoors to move the bubbles into the crowd)
Wireless Control Unit
Bunch of Cables to connect them all
HardCase for all the gear
Extra Set of Wands for each machine
3 bottles of UV bubble juice

General Pic without Fans

DSCN0732.jpg

General Pic with Fans

DSCN0735.jpg

Wireless Controller

DSCN0734.jpg

Close Up W/ Fan

DSCN0736.jpg

Bubbling Up The Neighborhood

DSCN0737.jpg
 
Looks very good!!!
 
Looks very nice. I know the photo is just that, a photo, but you have the stands pretty high and have the fans pointing up. That places the bubbles further in the air and less opportunity to fall into the crowd (if there is a breeze) and that's a must. The kiddies have to feel them. I like the stands, but I'd probably lower them and try to create a way for the fans to be behind them pointing straight out.
 
Trust me, they will cover the area in front of them. Its not evident in the picture because they were just starting up, but 4 machines with dispersion fans puts out a massive amount of bubbles and the fans are designed to get them out farther than 2 feet in front of the machine, they fall well tho.

I've considered looking at some of that "Drying" bubble fluid that disentigrates before hitting the floor so I can use this indoors when there are slicker surfaces. I'm also gonna look into the floor mats as well. And obviously if it were a smaller indoor show, I wouldn't use 4 machines as it'd fill the whole house, and I probably wouldn't need the fans indoors either.
 
I know i'll be doing a few shows this summer that are stage shows and the crowds will be anywhere from 300-600 kids. Its for the "Kiawah Karnival" night on a resort I work. This year i booked DJ work every friday night for Teen Blacklight Dance Nite, several bubble shows for the carnival night and a couple other periodic DJ gigs throughout the summer. I wanted something that could easily be scaled down for 20 kids in Aunt Jenny's living room, or something that could fill a park with bubbles. I think i've come close to doing that and look forward to joining the bubble club.
 
Excellent job on the machines. It is MUCH better having 4 separate machines as opposed to a coupe of big ones. It's great to get them off a table.

You know what's cool. Put all 4 in each corner of a room and hit the remote and have all of them go at once.

Here's some photos from this past weekend's kids party. It was in a church basement so I brought in minimal equipment. There were about 50 children. The table is sideways because that's the way I like it. I'm used to walking over and changing the song alot and I hated walking around the table.

Excuse the quality. The pictures were taken with my camera phone.

bubbledj1.jpg


bubbledj2.jpg