PCDJ Pro (Red) 5.1 with Gigaport

To many ads? Support ODJT and see no ads!
Hi
I have already posted a similar question elsewhere but thought that I would throw this open, since I have all of the equipment as was hoping to use it on several gigs over this weekend.
Originally, I was using my PCDJ with an E-mu 1820m, but had a problem assigning the channels. Both virtual players came out of the same stereo pair, so you can't prefade, mix or crossfade.
Initially, all fingers pointed to the E-mu, but I have since borrowed a Gigaport, and get virtually the same results. Both virtual decks come up on outputs 1 and 2, even with option 5 selected in Hardware/Workmode.
All I need is a clean pair of stereo outputs from each VCD, as I will mix/crossfade/monitor on the Denon DN-X500 via headphones as usual.
Will PCDJ Pro (Red) version 5.1 (Yes, I know it's quite old now, but one upgrade at a time...) work with the Gigaport?
My friend has FX and it works just fine, but assigning the outputs on FX is totally different to what I have on PCDJ Pro.
Will it ever work? Or have I got to upgrade something else.....
Regards, and many thanks to Jokerswild and Toqer for their help in other posts so far.
Steve.
 
You'll save yourself a lot of time and effort (not to mention money), by just using two inexpensive USB sound cards.

Get a couple Turtle Beach Micros or Behringer UCA202s, and map each deck to a card, which then goes to a separate channel on your mixer.
 
I've not used the TB Micros but the Behringer UCA's work pretty darn nice for a $30 each sound device.

Now to your question. You should be able to go into "Config" and select workmode 5 and then go to Soundcard 1 and assign channels 1/2 then assign soundcard 2 to 3/4.
Be sure and run "TEST" after you assign each output. It will tell you if it passed or failed.
Be sure the TB micro drivers are set correctly. Open the "virtual mixer" that came with the TB Micro and make sure that channel has stereo 1/2 are assigned to the correct outputs with 3/4 muted and on Channel 2 that 1/2 are muted and 3/4 are assigned.
This is how the Indigo DJ card set's up and would guess that the TB Micro has something similar.
 
Guess what!!

You'll never guess, - I've got it working with the Gigaport!

Although the guy working in the computer shop I tried didn't give me the answer, It prompted me to systematically work my way through all the variations, and eventually I hit upon the answer.

You have to select 'multichannel mode' and option 5 in config, and it worked straight away! The only odd thing is that the left deck comes up on outputs 1&2, and the right on 5&6. Can't imagine why I couldn't get it to work before, but at least it's working now!!

I'll let you know how it goes after tonight. Christmas party for 250 people. Let's hope the whole thing doesn't fall over!

Will give it another try with the E-mu (my original soundcard) once things settle down a little here.

Thanks for your help.

Steve.