SATA vs IDE Hard drives

To many ads? Support ODJT and see no ads!

jokerswild

Chief Bottle Washer
Feb 11, 2007
18,776
1,288
Elkhart, IN
www.totalimpactdjs.com
Ok so I'm building a new computer and it only has one IDE header but has 4 SATA headers...

So, stupid question do the SATA drives work like IDE meaning can it be used as a master drive (ie for the C drive or opsys drive) without using the IDE header?

Part II of stupid question... If I hook up an IDE hard drive will it over ride the SATA as the master drive?

Sorry SATA drives are new to me and I just don't know...
 
Set it up via the BIOS. Make sure your primary is on the SATA0 slot and so forth.
I usually use SATA drives for the music and and IDE 20g for the OS. Your secondary IDE channel for your DVD-rom...
Check with the MOBO manufacturer for the settings. Most is done via the BIOS.
What OS are you using? Most should fix itself as you turn it on after you have it all put together...
 
Most of these newer motherboards will allow you to select the SATA to take booting priority over the IDE. So remember what drive you connect to your SATA0 slot and tell the BIOS to read that first.

What motherboard are you using so we can compare apples to apples.

SATA drives are a LOT simpler to use and more flexible in storage management than traditional IDE Drives. They are easier to RAID together most of the time within the motherboard hardware. Also you don't have to worry about Master/Slave pins haunting you. The only gotcha you must watch out for is putting any amount of stress on those plastic SATA connectors on the drive. It is very easy to snap one of those connectors off. Yeah you feel real crappy at the end of the day if you snap one off on a 500 gig guy.
 
Most of these newer motherboards will allow you to select the SATA to take booting priority over the IDE. So remember what drive you connect to your SATA0 slot and tell the BIOS to read that first.

What motherboard are you using so we can compare apples to apples.
MSI K9N-Neo V3 with NVidia nForce Chipset 560
 
Set it up via the BIOS. Make sure your primary is on the SATA0 slot and so forth.
I usually use SATA drives for the music and and IDE 20g for the OS. Your secondary IDE channel for your DVD-rom...
Check with the MOBO manufacturer for the settings. Most is done via the BIOS.
What OS are you using? Most should fix itself as you turn it on after you have it all put together...

I thought of doing it that way but then thought why shouldn't the OS be able to take advantage of the faster access speeds of a SATA connection?

If I run out of onboard SATA connections I'll use the IDE but since there was only one that can come later.
 
Also, aren't SATA drives capable of higher capacity than IDE? Or, am I just full of misinformation.

I hear there's a new type of SATA drive, the SATA N. It is a hell of a drive.
 
SATA drives are currently the trend. IDE's are slowly being phased out. Best buy only offers big like (120 gig) IDE sizes now. SATA now has reached to 2 TB.

Currently SATA is offered in different flavors some are supported by some RAID controllers and some not so much, always check with the manufacture to see if your SATA RAID controller supports these flavors.

SATA 150Mbytes/sec* SATA II 300Mbytes/sec* SATA III 600Mbytes/sec*
(Borrowed Data)

As you can see SATA III is hella fast. Combine that into a RAID 0 and you got one sweet system!
 
Once your OS is loaded, why even worry about which connection.
I guess i should have prefaced with I am using OTS to DJ from and the IDE channel is my primary HD. I use the SATA for storage so it finds quicker, that's all.
The information being shared with you is correct though, the easiest way is to hook only 1 SATA drive up and use the SATA0 slot. Install your OS, then shut down, add the other HD to the header and let the OS find everything.
 
SATA 150Mbytes/sec* SATA II 300Mbytes/sec* SATA III 600Mbytes/sec*
(Borrowed Data)

As you can see SATA III is hella fast. Combine that into a RAID 0 and you got one sweet system!

I wont answer the BOLD bit Travis :D
 
lol Travis its not the info you provided - I think you missed the point on what I said


BORROWED DATA thing ..... w@res if you know what some know what that word really means

Borrowed/sto**n data lol :)