Video of adj mydmxgo

To many ads? Support ODJT and see no ads!
No. I've reached out to the manufacturer for assistance. I've tried a bunch of generics already. Will keep poking.
You can make your own with the Profile Builder.
 
  • Like
Reactions: djcrazychris
I'm picking them.

im embarrassed to say i didnt even know you could do that... i guess doing it the normal way probably does free up more address space....but if you dont need a ton of address space then your way is fine and easy!!

cc
 
Yea, for most DMX the addresses used are immaterial .. just need to fit all of your devices into the space you have available (with the standard myDMX go, that's only 256 addresses). Using sequential addressing makes it easier to manage the whole block .. using specified addresses makes it easier to work with fixtures should you use alternative controls at times.

For the Aeon Raven PFX I use, the addresses are specific to the function. There are several pages of the manual that lay out the specific addresses you need to set the fixture to for it to behave properly.
 
Does myDMX Go have a DMX black-out button somewhere? Also, can you setup a scene where the only thing showing would be uplights with a single color? I'm still a bit lost on that one.
This SHOULD be blackout ..

1549822305197.png

though I've read it doesn't do it on some devices .. might be a device issue as well.
 
Does myDMX Go have a DMX black-out button somewhere? Also, can you setup a scene where the only thing showing would be uplights with a single color? I'm still a bit lost on that one.

as steve said...thats the blackout button.... u can tap it for a quick blackout...or tap and slide to put it in constant blackout until retapped.... all those buttons are set up that way....

what i would recommend on the uplights is to utilize the "STOP" color setting... and then go over to the master dimmer....click on it...and it will bring up the sub dimmers....dim all other fixtures....then bring it back up when needed

i recommend playing with it and touching every single button to see what kind of fun it has....i just played for a day and found all kinds of things

cc
 
as steve said...thats the blackout button.... u can tap it for a quick blackout...or tap and slide to put it in constant blackout until retapped.... all those buttons are set up that way....

what i would recommend on the uplights is to utilize the "STOP" color setting... and then go over to the master dimmer....click on it...and it will bring up the sub dimmers....dim all other fixtures....then bring it back up when needed

i recommend playing with it and touching every single button to see what kind of fun it has....i just played for a day and found all kinds of things

cc

Thanks. I didn't realize that sliding would make the top buttons stick. I finally got something usable with my 9X18 uplights. They have a "rainbow 9X18 RGBAW+UV" under "varied" that works fairly well, when the fixture is in 6 channel mode. It still doesn't match colors but about half the time with the colorstrip but I can live with it. I have some new 2' DMX cables arriving tomorrow and a couple of DONNER transmitters (I seem to have lost my barrel units) arriving as well. I'm probably going to re-mount my colorstrip to the side of the mini-T then perm-wire everything. I have some thick foam that I'm going to use to pack the entire rig into hauling boxes. I've got to tell you again that I can't thank you enough for the bump on this product. It's the best DMX controller I've seen, by far. Perfect for the mobile jock who just wants the fixtures to work without spending hours and hours of programming and frustration.
 
Thanks. I didn't realize that sliding would make the top buttons stick. I finally got something usable with my 9X18 uplights. They have a "rainbow 9X18 RGBAW+UV" under "varied" that works fairly well, when the fixture is in 6 channel mode. It still doesn't match colors but about half the time with the colorstrip but I can live with it. I have some new 2' DMX cables arriving tomorrow and a couple of DONNER transmitters (I seem to have lost my barrel units) arriving as well. I'm probably going to re-mount my colorstrip to the side of the mini-T then perm-wire everything. I have some thick foam that I'm going to use to pack the entire rig into hauling boxes. I've got to tell you again that I can't thank you enough for the bump on this product. It's the best DMX controller I've seen, by far. Perfect for the mobile jock who just wants the fixtures to work without spending hours and hours of programming and frustration.

i gotta be honest....im shouting this products praises from the rooftops...i know the anxiety of dmx programming... and this is such a stellar solution!

I hate that about your uplights....we gotta figure out a way to fix it... did u try it in other channel modes? Is your light an RGBAWUV too?

cc
 
with a mini-to-micro cable I bought.

View attachment 36193


Well, I downloaded everything and my tablet will still not recognize the Sushi.
BUT
I did figure out why.
It's definitely the cable I bought (above)
I registered and updated the Sushi using my laptop and the cable that came with the Sushi.
Worked like a charm.
However, I plugged the Sushu into the tablet, using MY cord...and NOTHING!
Today, I am buying a MICRO to USB adapter.
 
  • Like
Reactions: djcrazychris
Well, I downloaded everything and my tablet will still not recognize the Sushi.
BUT
I did figure out why.
It's definitely the cable I bought (above)
I registered and updated the Sushi using my laptop and the cable that came with the Sushi.
Worked like a charm.
However, I plugged the Sushu into the tablet, using MY cord...and NOTHING!
Today, I am buying a MICRO to USB adapter.

Ah man...hope u can get it going!

cc
 
  • Like
Reactions: Ausumm
As I read your post I realized...
that ironically.....
I went with the LightRIder app
BECAUSE I WANTED TO MAKE IT EASIER!!!

lololol.... i had an uncle who always knew a great shortcut back in the days before gps.... we always rolled our eyes..and spent 4 hours lost....every vacation a nightmare...lol

cc
 
  • Like
Reactions: ittigger and Ausumm
So i contacted LightRider on their facebook page to ask about transferring projects to a new device.... he said that they hope to have it available by summer... then sorta scolded me as a mydmxgo user to contact adj from now on...lol... i get it...but since theyve been at it for a couple years and adj has been at it for a couple months...i figured they would know better

They must have made their money and washed their hands of it with adj...

cc
 
  • Like
Reactions: ittigger
So i contacted LightRider on their facebook page to ask about transferring projects to a new device.... he said that they hope to have it available by summer... then sorta scolded me as a mydmxgo user to contact adj from now on...lol... i get it...but since theyve been at it for a couple years and adj has been at it for a couple months...i figured they would know better

They must have made their money and washed their hands of it with adj...

cc
They want you to buy THEIR dongle .. such are the issues of OEM agreements.
 
Just bought TWO new "female USB to micro" adapter cables.
HOPEFULLY one of them will work!!
 
  • Like
Reactions: djcrazychris
Any new updates from you guys?

i tweaked a few of my presets... wasnt happy with some of the color mixing i had created...got a little lazy and settled....some of the odder colors have a sweet spot...i found a really nice amber that worked for my rgb only fixtures as well as my hex fixtures... did several color combos named after sports teams ive got a solid 40 presets....leaving the last 10 open for specific bride requests...school colors for grad parties ...etc...

cc
 
  • Like
Reactions: sonic-vision
DJCrazy What tablet you using?
 
  • Like
Reactions: djcrazychris
Just got an email from Rainbow about a myDMX Go profile for their fixture. Funny thing, I'm already using one that was under the "_Varied" category. Kudos to Rainbow..........

Hi Rick,

Thank you for your email.
I have just contacted ADJ and they will create profile for our lights.
It should be done soon. I will let you know once it’s ready and provide download link.

Let me know if any other assistance needed.