For sure!Lycra would be the better option for weight. That board with 1/4 inch plexi glass in all those white areas would up the weight another 20 lbs or more.
cc
For sure!Lycra would be the better option for weight. That board with 1/4 inch plexi glass in all those white areas would up the weight another 20 lbs or more.
BTW...I love the look of the wall behind you! And are you using those 2 USB sticks as your source of music?
It's tougher when you don't know if it's the box or the Donners. Donners could be getting interference from other things in the venue or from the myDMX Go itself.BTW, thought I'd chime in on myDMX Go. I had my first problem with it at this past weekend's gig. Still not sure what went wrong. I had both mini-T bars setup, 4 Chauvet 255 movers, 2 Chauvet Colorstrip minis and a dozen 9X18 uplights. Everything worked when I set it up, no problems. Went over to the ceremony site and came back about 2 hours later. The uplights were still on but I lost control of the t-bar racks. Rebooted the DMX box, the Donner transmitter and rebooted my tablet 2-3 times. For the first 30 minutes it would work for a few minutes, then lose connection, reboot, repeat. After the 3rd reboot it went back to working and no more problems for the rest of the evening.
It's tougher when you don't know if it's the box or the Donners. Donners could be getting interference from other things in the venue or from the myDMX Go itself.
I know some folks have been moving their Donners away from the myDMX Go with a small cable. Might help.Yea, that's what's bugging me. Everything tested out perfectly for about an hour. It only failed to work the first 30 minutes of the reception, then everything went back to being just fine. Since switching to the myDMX, I've been using one of the Donner transmitters. Couldn't get my stronger transmitter to work and didn't take the time to debug it. I guess I'll have to do that debug this week and will try again next weekend.
I know some folks have been moving their Donners away from the myDMX Go with a small cable. Might help.
i honestly love mine but wouldnt recommend it to most people...its heavy.... but i love the look...so i carry it
My OCD notes the sub is not quite dead center on the facade.....
Yeah mine are dimmed down to 25 percent on the mydmxgo app....its got individual dimmers for each fixture on the main desktop...i dim my intimidators down to about 50 percent at times as wellI love my wash FX2s but I would think they are extremely bright to be used times 4 for a wedding reception. maybe I am wrong. are you dimming them down at all? would 2 suffice?
Lololol so trueI am NOT a fan of facades.
But that one looks slick!
Great! Now you ruined it for Chris AND the rest of us!
Damn you! Can't you leave well enough alone???
That stinks...BTW, thought I'd chime in on myDMX Go. I had my first problem with it at this past weekend's gig. Still not sure what went wrong. I had both mini-T bars setup, 4 Chauvet 255 movers, 2 Chauvet Colorstrip minis and a dozen 9X18 uplights. Everything worked when I set it up, no problems. Went over to the ceremony site and came back about 2 hours later. The uplights were still on but I lost control of the t-bar racks. Rebooted the DMX box, the Donner transmitter and rebooted my tablet 2-3 times. For the first 30 minutes it would work for a few minutes, then lose connection, reboot, repeat. After the 3rd reboot it went back to working and no more problems for the rest of the evening.